Dr. Daniel Trimble
Associate Professor, Mechanical, Manuf & Biomedical Eng
Publications and Further Research Outputs
Peer-Reviewed Publications
Williams, N.P., Trimble, D., O'Shaughnessy, S.M., An experimental investigation of liquid immersion cooling of a four cell lithium-ion battery module, Journal of Energy Storage, 86, 2024
D.W. Salter, G. Bachelier, P.S. Kumavat, D. Trimble and S.M. O"Shaughnessy, An experimental investigation of forced convective liquid immersion cooling of a 12-cell li-ion battery module, 9th European Thermal Sciences Conference (EUROTHERM 2024), Bled, Slovenia, 2024
Quill Luke , Ferreira Diogo , Joyce Brian , Coleman Gabriel , Harper Carla , Martins Marta , Hodkinson Trevor , Trimble Daniel , Gill Laurence , O"Connell David W., An integrated mitigation approach to diffuse agricultural water pollution"a scoping review, Frontiers in Environmental Science, 12, 2024, p1 - 17
Tobin, D. and O'Shaughnessy, S. and Trimble, D., Characterisation of force and torque with auxiliary heating during friction stir spot welding of AA2024-T3, Results in Materials, 21, (100535), 2024
Singh, D. and Tobin, D. and Dowling, L. and Trimble, D., Optimization of Cobalt Chrome 3D re-entrant Auxetics fabricated using Selective Laser Melting, Engineering Structures, 278, (115542), 2023
Niall P. Williams, Daniel Trimble, Séamus M. O'Shaughnessy, Thermal Management of Lithium-ion Batteries for Electric Vehicles through Immersion Cooling, 2023 22nd IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) 30 May-2 June 2023 2023, Florida, USA, June 2023, 2023
McKenna, T. and Tomonto, C. and Duggan, G. and Lalor, E. and O'Shaughnessy, S. and Trimble, D., Evaluation of bimodal microstructures in selective-laser-melted and heat-treated Ti-6Al-4V, Materials and Design, 227, (111700), 2023
Bobby Gillham, Andrei Yankin, Fionnan McNamara, Charles Tomonto, Chunjie Huang, Jeroen Soete, Garret O'Donnell, Daniel Trimble, Shuo Yin, David Taylor, Rocco Lupoi, Tailoring the Theory of Critical Distances to better assess the combined effect of complex geometries and process-inherent defects during the fatigue assessment of SLM Ti-6Al-4V, International Journal of Fatigue, 172, 2023, p107602
Munina I.; Grigoriev I.; O'Donnell G.; Trimble D., A Review of 3D Printed Gradient Refractive Index Lens Antennas, IEEE Access, 11, 2023, p8790 - 8809, p10.1109/ACCESS.2023.3239782
N.P. Williams, D. Trimble, S.M. O'Shaughnessy, Liquid immersion thermal management of lithium-ion batteries for electric vehicles: An experimental study, Journal of Energy Storage, 72, 2023, p108636
Alexa Ennis, Deanna Nicdao, Srikanth Kolagatla, Luke Dowling, Yekaterina Tskhe, Alex J. Thompson, Daniel Trimble, Colm Delaney, Larisa Florea, Two-Photon Polymerization of Sugar Responsive 4D Microstructures, Advanced Functional Materials, 2023
Przepiorowski, J. and Munina, I. and Ammann, M.J. and Trimble, D., Fully 3D-Printed Hemispherical Dielectric Resonator Antenna for C-band Applications, 2023
Williams, N. P., Power, J., Trimble, D., O'Shaughnessy, S. M., An experimental evaluation of thermoelectric generator performance under cyclic heating regimes, Heat and Mass Transfer, 2022
L. Dowling and J. Kennedy and D. Trimble, Effect of a modified energy density equation to achieve a more uniform energy input during LPBF for improved repeatability, Journal of Manufacturing Processes, 77, 2022, p607--615
Bobby Gillham, Andrei Yankin, Harry Shipley, Fionnan McNamara, Charles Tomonto, Garret O'Donnell, Daniel Trimble, Shuo Yin, David Taylor, Rocco Lupoi, The Analysis of Small-Scale Notches on the Fatigue Performance of SLM Ti-6Al-4V; A Theory of Critical Distances Approach, Key Engineering Materials, 926, 2022, p250 - 267
Saini, J.S. and Dowling, L. and Trimble, D. and Singh, S., Selective laser melting of CoCr alloys in biomedical application: A review, 2022, 287-309pp
Saini, J.S. and Dowling, L. and Trimble, D. and Singh, D., Mechanical Properties of Selective Laser Melted CoCr Alloys: A Review, Journal of Materials Engineering and Performance, 30, (12), 2021, p8700-8714
Tomasz G Zieli"ski, Kamil C Opiela, Piotr Paw"owski, Nicolas Dauchez, Thomas Boutin, John Kennedy, Daniel Trimble, Henry Rice, Bart Van Damme, Gwenael Hannema, Rafa" Wróbel, Seok Kim, Shahrzad Ghaffari Mosanenzadeh, Nicholas X Fang, Jieun Yang, Baltazar Briere de La Hosseraye, Maarten CJ Hornikx, Edouard Salze, Marie-Annick Galland, René Boonen, Augusto Carvalho de Sousa, Elke Deckers, Mathieu Gaborit, Jean-Philippe Groby, Reproducibility of sound-absorbing periodic porous materials using additive manufacturing technologies: Round robin study, Additive Manufacturing, 36, 2020
H.Mao, R.Rumpler, M.Gaborit, P.Göransson, J.Kennedy, D.O'Connor, D.Trimble, H.Rice, Twist, tilt and stretch: From isometric Kelvin cells to anisotropic cellular materials, Materials Design, 193(2020)108855, 2020, p1 - 15
Trimble D.; Agarwal A.; McDonnell D.; Barron S.; Ahearne E.; O'Donnell G.E., Finite element simulation of orthogonal machining of biomedical grade Co"Cr"Mo alloy, CIRP Journal of Manufacturing Science and Technology, 2020
Saini, JS, Dowling, Luke, Kennedy, John, Trimble, Daniel, Investigations of the mechanical properties on different print orientations in SLA 3D printed resin, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234, (11), 2020, p2279-2293
H.J.Rice J.Kennedy P.Göransson L.Dowling D.Trimble, Design of a Kelvin cell acoustic metamaterial, Journal of Sound and Vibration, 472, (115167), 2020
Dowling L., Kennedy J., O'Shaughnessy S., Trimble D., A review of critical repeatability and reproducibility issues in powder bed fusion, Materials and Design, 186, 2020
McSweeney E., Trimble D., O'Shaughnessy S., The Deleterious Effect of Thermal Cycling on Thermoelectric Generators , 14th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , Wicklow, Ireland , 2019, 2019, pp1399-1404 -
Kennedy, J., L., Flanagan, Dowling, L., Rice, H., Trimble, D., , The influence of additive manufacturing processes on the performance of a periodic acoustic metamaterial, International Journal of Polymer Science, Volume 2019, (Article ID 7029143), 2019
Zielinski, T.G., Opiela, K.C., Pawlowski, P., Dauchez, N., Boutin, T., Kennedy, J., Trimble, D., Rice, H., Differences in sound absorption of samples with periodic porosity produced using various Additive Manufacturing Technologies, Proceedings of the International Congress on Acoustics, 2019-September, 2019, p4505-4512
Dowling, L., Flanagan, L., Rice, H., Trimble, D., and Kennedy, J, The use of a benchmark periodic metamaterial to inform numerical modelling and additive manufacturing approaches, ISMA 2018, (paper no 518), 2018
H. Shipley, D. McDonnell, M. Culleton, R. Coull, R. Lupoi, G. O'Donnell, D. Trimble, Optimisation of Process Parameters to Address Fundamental Challenges during Selective Laser Melting of Ti-6Al-4V: A Review, Journal of Machine Tools and Manufacture, 2018, p1-10
Dowling, L. and Mao, H. and Flanagan, L. and Kennedy, J. and Cuenca, J. and Rice, H. and Trimble, D. and Göransson, P., A combined design-manufacturing-testing investigation of micro- To macro-scale tailoring of open poroelastic materials based on perturbed Kelvin cell micro-geometries, 2018, pp1163-1177
O'Shaughnessy, S.M. and Sloane, A. and Kearns, A. and Byrne, G. and Trimble, D. and O'Donnell, G.E., Design, characterisation and performance evaluation of a Peltier-driven cryo-adhesive fixture for manufacturing operations, Materials and Design, 141, 2018, p99-109
Barry Aldwell, Daniel Trimble, Shuo Yin and Rocco Lupoi, Enabling diamond deposition with Cold Spray through the coated particle method, Materials Science Forum, 879, 2017, p1194 - 1199
Trimble, D. and Shipley, H. and Lea, L. and Jardine, A. and O'Donnell, G.E., Constitutive analysis of biomedical grade Co-27Cr-5Mo alloy at high strain rates, Materials Science and Engineering A, 682, 2017, p466-474
Barry Aldwell, Shuo Yin, Kevin A. McDonnell, Daniel Trimble, Tanvir Hussain, Rocco Lupoi, A novel method for metal-diamond composite coating deposition with cold spray and formation mechanism, Scripta Materialia, 115, 2016, p10 - 13
Scripta Materialia, 115, (2016), 10 - 13p, Professor C. A. Schuh, [eds.]
TRIMBLE, D. and O'DONNELL, G.E., Flow stress prediction for hot deformation processing of 2024Al-T3 alloy, Transactions of Nonferrous Metals Society of China (English Edition), 26, (5), 2016, p1232-1250
Transactions of Nonferrous Metals Society of China, 26, (2016), 1232 - 1250p, Yi Kang, [eds.]
Materials & Design, 76, (2015), 150 - 168p, Alexander M. Korsunsky, [eds.]
Trimble, D. and O'Donnell, G.E. and Monaghan, J., Characterisation of tool shape and rotational speed for increased speed during friction stir welding of AA2024-T3, Journal of Manufacturing Processes, 17, 2015, p141-150
D. Trimble, H. Mitrogiannopoulos, G. E. O'Donnell, and S. McFadden, Friction Stir Welding of AA2024-T3 plate - the influence of different pin types, Mechanical Sciences, 6, 2015, p51 - 55
Journal of Manufacturing Processes, 17, (2015), 141 - 150p, S. Kapoor, [eds.]
Trimble, D. and O'Donnell, G.E., Constitutive Modelling for elevated temperature flow behaviour of AA7075, Materials and Design, 76, 2015, p150-168
CIRP Annals - Manufacturing Technology, 61, (2012), 9 - 12p, CIRP, [eds.]
Trimble, D., Monaghan, J., O'Donnell, G.E., Force generation during friction stir welding of Al2024-T3, CIRP Annals- Manufacturing Technology, 61, (1), 2012, p9 - 12
Research Expertise
Projects
- Title
- Process Material Interaction during Micromachining of Biomedical Polymer Materials
- Summary
- This work focused on the characterisation of process material interaction during the micromachining of a biomedical grade polymer which is used to manufacture intraocular lens (IOLs) by the partnering company, Alcon. The machining characteristics of polymers depend primarily on their mechanical, thermal, and rheological properties. High material elasticity and thermal expansions may make efficient material removal and precision machining a challenge. Often, low thermal conductivities and softening temperatures further hamper these efforts. Many properties are also highly temperature and strain-rate sensitive which can cause unwanted changes in material behaviour in the cutting zone during machining.
- Funding Agency
- Amber Targeted Project
- Title
- Fundamental Investigation into the Machining of Cobalt Chrome
- Summary
- Cobalt Chrome alloys are used extensively within the biomedical industry during the manufacturing of orthopaedic implants due to their desirable mechanical properties of fatigue resistance, tensile strength, corrosion resistance and biocompatibility. However, these alloys are difficult to machine due to their strain hardening capabilities. The goal of this research is to develop a fundamental understanding of the cutting mechanics of Cobalt Chrome, specifically for biomedical applications through the development of a Finite Element Model and a statistical machining campaign.
- Funding Agency
- Irish Research Council
- Title
- Design of a Low Powered Emergency Exit Sign
- Summary
- This research was focused on the design and manufacture of a Low Powered Emergency Exit Sign that consumes 80% less power than standard signs. This was achieved through the design of a novel light guide and diffuser films using low powered LEDs. The product was brought from concept to prototype and met all luminance, lux and contrast measurements to ISO Standards.
- Funding Agency
- Enterprise Ireland
- Title
- Design of a Water Harvesting System
- Summary
- This research was focused on the design of a Water Harvesting System for domestic households. The system was designed to store and deliver rainwater for toilet flushing and garden irrigation. When the system store is low, it is supplemented by water from main.
Recognition
Awards and Honours
E3 Kinsella Challenge Award
Nomination Trinity Innovation Awards
Provost PhD Project Awards 2018-19
PhD Studentship Award
Irish Research Council Postdoctoral Research Award