Dr. Anthony Robinson

• Albadawi, A., Donoghue, D.B., Robinson, A.J., Murray, D.B., Delauré, Y.M.C., On the assessment of a VOF based compressive interface capturing scheme for the analysis of bubble impact on and bounce from a flat horizontal surface, International Journal of Multiphase Flow, 65, 2014, p82-97Journal Article, 2014, DOI , URL , TARA - Full Text
• Lesage F.J, Siedel S, Cotton J.S, Robinson A.J, A mathematical model for predicting bubble growth for low Bond and Jakob number nucleate boiling, Chemical Engineering Science, 112, 2014, p35 - 46Journal Article, 2014, DOI , URL
• Siedel S, Robinson A.J, Kempers R, Kerslake S, Development of a naturally aspired thermosyphon for power amplifier cooling, Journal of Physics: Conference Series, 525, (1), 2014, p012007-Journal Article, 2014, DOI , URL
• Ravache E, Siedel S, Kempers R, Robinson A.J, Investigation of vapour chamber performance with a concentrated heat source, Journal of Physics: Conference Series, 525, (1), 2014, p012005-Journal Article, 2014, DOI , URL
• A. Byrne, G. Byrne, G. O'Donnell, A.J. Robinson, Case studies of cavity and external wall insulation retrofitted under the Irish Home Energy Saving Scheme: Technical analysis and occupant perspectives, Energy and Buildings, 130, 2016, p420-433Journal Article, 2016, DOI , URL
• S. Siedel, S. Cioulachtjian, A.J. Robinson, J. Bonjour, Lateral Coalescence of Bubbles in the Presence of a DC Electric Field, International Journal of Heat and Mass Transfer, 76, 2016, p127-132Journal Article, 2016, DOI , URL
• S. M. O'Shaughnessy, M.J. Deasy, V. Doyle, A.J. Robinson, Adaptive Design of a Prototype Electricity-Producing Biomass Cooking Stove, Energy for Sustainable Development, 28, 2015, p41 - 51Journal Article, 2015, DOI , URL , TARA - Full Text
• K. Smith, R. Kempers, A.J. Robinson, Boiling and Condensation in Small Diameter Closed two-Phase Thermosyphons, Proceedings of 9th International Conference on Boiling and Condensation Heat Transfer, 9th International Conference on Boiling and Condensation Heat Transfer, Boulder, Colorado, USA, April 26-30, 2015Conference Paper, 2015
• G.P. Celata, F. Commisso, P. Di Marco, A.J. Robinson, L. Saraceno, and G. Zummo , Effect of Electric Field on Flow Boiling Heat Transfer at Microgravity and at Normal Gravity, Proceedings of 9th International Conference on Boiling and Condensation Heat Transfer, 9th International Conference on Boiling and Condensation Heat Transfer, Boulder, Colorado, USA, April 26-30, 2015Conference Paper, 2015
• S.M O'Shaughnessy, M.J. Deasy; V. Doyle; A.J.Robinson, Performance analysis of a prototype small scale electricity-producing biomass cooking stove, Applied Energy, 156, 2015, p566 - 576Journal Article, 2015, DOI , URL , TARA - Full Text
• Byrne, A., Byrne, G., Davies, A., Robinson, A.J., Transient and quasi-steady thermal behaviour of a building envelope due to retrofitted cavity wall and ceiling insulation, Energy and Buildings, 61, 2013, p356-365Journal Article, 2013, DOI , URL
• K.J. Brown, R. Farrelly, S.M. O'Shaughnessy, A.J. Robinson, Energy Efficiency of Electrical Infrared Heating Elements, Applied Energy, 162, 2016, p581 - 588Journal Article, 2016, DOI , URL , TARA - Full Text
• S. Battaglioli, R. P. Mooney, M. Seredyñski, A. Robinson, S. McFadden, Computer Modelling of Manufacturing Processes: The Development of a 2D Axisymmetric Model of the Bridgman Casting Process, 32nd International Manufacturing Conference, Queens University Belfast, 3-4 September, edited by J. Butterfield, P. Hermon , 2015Conference Paper, 2015, DOI , TARA - Full Text
• R. Jenkins, C. De Brún, R. Kempers, R Lupoi, A. J. Robinson, Thermal-hydraulic performance of convective boiling jet array impingement, Journal of Physics: Conference Series, 745, 2016, p1 - 10Journal Article, 2016, DOI , URL , TARA - Full Text
• R. Jenkins, R. Lupoi, R. Kempers, A.J. Robinson, Heat Transfer Performance of Boiling Jet Array Impingement on Micro-Grooved Surfaces, Experimental Thermal and Fluid Science, 80, 2017, p293 - 304Journal Article, 2017, DOI , URL
• Battaglioli S, McFadden S, Robinson A.J, Numerical simulation of Bridgman solidification of binary alloys, International Journal of Heat and Mass Transfer, 104, 2017, p199 - 211Journal Article, 2017, DOI , URL
• Smith K, Byrne G, Kempers R, Robinson A.J, Electrohydrodynamic augmentation of a reflux thermosyphon, Experimental Thermal and Fluid Science, 79, 2016, p175 - 186Journal Article, 2016, DOI , URL
• Robinson A.J, A thermal model for energy loss through walls behind radiators, Energy and Buildings, 127, 2016, p370 - 381Journal Article, 2016, DOI , URL
• Robinson A.J, Lyons A.M, Kempers R, Modelling the effective thermal conductivity of compressing structures including contact resistance, Simulation Modelling Practice and Theory, 67, 2016, p74 - 88Journal Article, 2016, DOI , URL
• Smith K, Siedel S, Robinson A.J, Kempers R, The effects of bend angle and fill ratio on the performance of a naturally aspirated thermosyphon, Applied Thermal Engineering, 101, 2016, p455-467Journal Article, 2016, DOI , URL
• Sara Battaglioi; Robin Patrick Mooney; Anthony Robinson; Shaun McFadden, Macroscale modelling of Bridgman furnace solidification for the prediction of texture evolution and columnar to equiaxed transition, 8th International Conference on Multiscale Materials Modeling, Dijon, France, 9/10/2016, Institute of Physics, 2016Poster, 2016, URL , TARA - Full Text
• M.J. Deasy, N. Baudin, S. M. O'Shaughnessy, A.J. Robinson, Simulation-Driven Design of a Passive Liquid Cooling System for a Thermoelectric Generator, Applied Energy, 205, 2017, p499 - 510Journal Article, 2017, DOI , URL , TARA - Full Text
• M.J. Deasy, S. M. O'Shaughnessy, L. Archer, A.J. Robinson, Electricity Generation from a Biomass Cookstove with MPPT Power Management and Passive Liquid Cooling, Energy for Sustainable Development, 43, 2018, p162 - 172Journal Article, 2018, DOI , URL , TARA - Full Text
• C. de Brún, R. Jenkins, T. Lupton, R. Lupoi, R. Kempers, A.J. Robinson, Confined Jet Array Impingement Boiling, Experimental Thermal and Fluid Science, 86, 2017, p224 - 234Journal Article, 2017, DOI , URL
• Miroslaw Seredyński, Sara Battaglioli, Robin Mooney, A Robinson, Jerzy Banaszek, Shaun McFadden, Code-to-code verification of an axisymmetric model of the Bridgman solidification process for alloys, International Journal of Numerical Methods for Heat & Fluid Flow, 27, (5), 2017Journal Article, 2017, DOI , URL
• Battaglioli S, Robinson A.J, McFadden S, Axisymmetric front tracking model for the investigation of grain structure evolution during directional solidification, International Journal of Heat and Mass Transfer, 115, 2017, p592 - 605Journal Article, 2017, DOI , URL
• Gibbons M.J, Robinson A.J, Heat transfer characteristics of single cone-jet electrosprays, International Journal of Heat and Mass Transfer, 113, 2017, p70 - 83Journal Article, 2017, DOI , URL , TARA - Full Text
• Byrne A, Byrne G, Robinson A, Compact facility for testing steady and transient thermal performance of building walls, Energy and Buildings, 152, 2017, p602 - 614Journal Article, 2017, DOI , URL
• Robinson A.J, Lesage A.F.J, Reilly A, McGranaghan G, Byrne G, O'Hegarty R, Kinnane O, A new transient method for determining thermal properties of wall sections, Energy and Buildings, 142, 2017, p139 - 146Journal Article, 2017, DOI , URL
• Robinson A.J, Tan W, Kempers R, Colenbrander J, Bushnell N, Chen R, A new hybrid heat sink with impinging micro-jet arrays and microchannels fabricated using high volume additive manufacturing, Annual IEEE Semiconductor Thermal Measurement and Management Symposium, 2017 33rd Thermal Measurement, Modeling & Management Symposium (SEMI-THERM), 2017, 2017, pp179 - 186Conference Paper, 2017, DOI , URL
• Razeeb K.M, Dalton E, Cross G.L.W, Robinson A.J, Present and future thermal interface materials for electronic devices, International Materials Reviews, 2017, p1-21-Journal Article, 2017, DOI , URL
• Gibbons M.J, Howe C.M, Di Marco P, Robinson A.J, Local Heat Transfer to an Evaporating Sessile Droplet in an Electric Field, Journal of Physics: Conference Series, 745, (3), 2016, p032066-Journal Article, 2016, DOI , URL , TARA - Full Text
• Donoghue, D.B., Albadawi, A., Delauré, Y.M.C., Robinson, A.J., Murray, D.B., Mechanisms of heat transfer for axisymmetric bubble impingement and rebound, Heat and Mass Transfer, 53, 2017, p1-12Journal Article, 2017, DOI , URL , TARA - Full Text
• Thomas L. Lupton, Anthony J. Robinson, Rocco Lupoi, Cold Sprayed Boiling Enhancement Coating, 2017 23rd International Workshop on Thermal Investigations of ICs and Systems (THERMINIC), Amsterdam, 27-29 September 2017, 2017, pp1 - 4Conference Paper, 2017, DOI , URL
• Gibbons, M.J. and Robinson, A.J., Electrospray array heat transfer, International Journal of Thermal Sciences, 129, 2018, p451-461Journal Article, 2018, DOI , URL , TARA - Full Text
• Gibbons, M.J. and Di Marco, P. and Robinson, A.J., Local heat transfer to an evaporating superhydrophobic droplet, International Journal of Heat and Mass Transfer, 121, 2018, p641-652Journal Article, 2018, DOI , URL , TARA - Full Text
• Robinson, A.J. and Kempers, R. and Colenbrander, J. and Bushnell, N. and Chen, R., A single phase hybrid micro heat sink using impinging micro-jet arrays and microchannels, Applied Thermal Engineering, 136, 2018, p408-418Journal Article, 2018, DOI , URL
• Smith, K. and Robinson, A.J. and Kempers, R., Confinement and vapour production rate influences in closed two-phase reflux thermosyphons Part B: Heat transfer, International Journal of Heat and Mass Transfer, 120, 2018, p1241-1254Journal Article, 2018, DOI , URL
• Smith, K. and Kempers, R. and Robinson, A.J., Confinement and vapour production rate influences in closed two-phase reflux thermosyphons Part A: Flow regimes, International Journal of Heat and Mass Transfer, 119, 2018, p907-921Journal Article, 2018, DOI , URL
• Robinson, A.J. and Tan, W. and Kempers, R. and Colenbrander, J. and Bushnell, N. and Chen, R., An ultra high performance heat sink using a novel hybrid impinging microjet - Microchannel structure, 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), (7992526), 2017, pp482-490Conference Paper, 2017, DOI , URL
• R. Lupoi, T. Lupton, R. Jenkins, A.J. Robinson, G.E. O'Donnell, Direct manufacturing of diamond composite coatings onto silicon wafers and heat transfer performance, CIRP Annals - Manufacturing Technology, 67, (1), 2018, p185 - 188Journal Article, 2018, DOI , URL
• Battaglioli, S. and Robinson, A.J. and McFadden, S., Influence of natural and forced gravity conditions during directional columnar solidification, International Journal of Heat and Mass Transfer, 126, 2018, p66-80Journal Article, 2018, DOI , URL
• Robinson, A.J. and Colenbrander, J. and Kempers, R. and Chen, R., Solid and Vapor Chamber Integrated Heat Spreaders: Which to Choose and Why, IEEE Transactions on Components, Packaging and Manufacturing Technology, 8, (9), 2018, p1581-1592Journal Article, 2018, DOI , URL
• M.J. Gibbons, G. Saccone, S.M. O'Shaughnessy, A.J. Robinson, P. Di Marco, Local convective heat flux to evaporating water droplets in micro-g to 2-g, 13th International Conference on Two-Phase Systems for Space and Ground Applications, Xi'an, China, October 15th-19th, 2018Conference Paper, 2018
• R.J. MacNamara, T.L. Lupton, R. Lupoi, A.J. Robinson, Enhanced Nucleate Pool Boiling on Copper-Diamond Textured Surfaces, Applied Thermal Engineering, 162, 2019, p114145Journal Article, 2019, DOI , URL
• R.Jenkins, B.Aldwell, S.Yin, M.Meyer, A.J.Robinson, R.Lupoi, Energy Efficiency of a Quartz Tungsten Halogen Lamp: Experimental and Numerical Approach, Thermal Science and Engineering Progress, 13, 2019, p100385Journal Article, 2019, DOI , URL
• Reilly, A. and Kinnane, O. and Lesage, F.J. and McGranaghan, G. and Pavía, S. and Walker, R. and O'Hegarty, R. and Robinson, A.J., The thermal diffusivity of hemplime, and a method of direct measurement, Construction and Building Materials, 212, 2019, p707-715Journal Article, 2019, DOI , URL
• Eraghubi, M. and Di Marco, P. and Robinson, A.J., Low mass flux upward vertical forced flow boiling of HFE7000, Experimental Thermal and Fluid Science, 2019, p291-301Journal Article, 2019, DOI , URL
• Baudin, N and McEvoy, J and Rouzes, M and Persoons, T and Robinson, A J, Experimental investigation of ionic wind cooling in plate fin heatsinks and needle electrode arrangements, Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Las Vegas, NV, USA, 2019Conference Paper, 2019, DOI , URL
• Gibbons, M.J., Garivalis, A.I., O'Shaughnessy, S., Di Marco, P., Robinson, A.J., Evaporating hydrophilic and superhydrophobic droplets in electric fields, International Journal of Heat and Mass Transfer, 164, 2021, p120539Journal Article, 2021, DOI , URL , TARA - Full Text
• Gibbons, M.J., Di Marco, P., Robinson, A.J., Heat flux distribution beneath evaporating hydrophilic and superhydrophobic droplets, International Journal of Heat and Mass Transfer, 148, 2020, p119093Journal Article, 2020, DOI , URL , TARA - Full Text
• Sadek, H., Robinson, A.J., Cotton, J.S., Ching, C.Y. and Shoukri, M, Electrohydrodynamic Enhancement of In-Tube Convective Condensation Heat Transfer, International Journal of Heat and Mass Transfer, 49, (9-10), 2006, p1647 - 1657Journal Article, 2006, DOI
• Cotton, J.S., Chang J.S., Robinson, A.J. and Shoukri, M., Electrohydrodynamically Enhanced Flow Boiling in an Eccentric Horizontal Cylindrical Channel, Journal of Enhanced Heat Transfer, 15, (3), 2008, p1 - 16Journal Article, 2008, DOI , URL
• Petrovic, S., Robinson, A.J. and Judd, R.L., Marangoni Heat Transfer in Subcooled Nucleate Pool Boiling, International Journal of Heat and Mass Transfer, 47, (23), 2004, p5115 - 5128Journal Article, 2004, DOI
• Robinson, A.J. and Judd, R.L., Bubble Growth in a Uniform and Spatially Distributed Temperature Field, International Journal of Heat and Mass Transfer, 44, (14), 2001, p2699 - 2710Journal Article, 2001, DOI
• Kempers, R., Robinson, A., Ching, C.Y., Ewing, D., Effect of Fluid Loading on the Performance of Wicked Heat Pipes, Proceedings of ASME Heat Transfer/Fluids Engineering Division Summer Meeting, (HT-FED2004-56403), 2004Conference Paper, 2004
• Song, F., Home, D., Robinson, A., Ewing, D. and Ching, C.Y, Experimental Investigation of High-Speed Rotating Heat Pipes, International Mechanical Engineering Congress and Exposition, Washington, USA, (IMECE2003-42432), 2003Conference Paper, 2003
• Robinson, A.J. and Judd, R.L., Vapour Bubble Growth in Uniform and Non-Uniform Temperature Fields, CSME Forum, Montreal, Canada, 2000Conference Paper, 2000
• Robinson A. and Judd, R.L., Heat Transfer Enhancement Due to Marangoni Convection Around Gas Bubbles Attached to a Heated Surface, 17th Canadian Congress of Applied Mechanics, Hamilton, Canada, 1999Conference Paper, 1999
• Robinson, A., Gidi A., Judd R.L. and Bardeleben M., Development of an Optical Device for Measuring Tube Bundle Vibrations in Tube Bundles, CSME Forum, Hamilton, Canada., 1996Conference Paper, 1996
• G. Prunet, F. Pawula, G. Fleury, E. Cloutet, A.J. Robinson, G. Hadziioannou, A. Pakdel, A review on conductive polymers and their hybrids for flexible and wearable thermoelectric applications, Materials Today Physics, 18, 2021, p100402Journal Article, 2021, DOI , URL , TARA - Full Text
• Hone T, Cahill, L, Robinson T, Korde C and Taylor D, The splitting of bamboo in response to changes in humidity and temperature, Journal of the Mechanical Behavior of Biomedical Materials, 111, 2020, p103990Journal Article, 2020, DOI , URL
• F. Lesage, R.L. Judd and A.J. Robinson, Numerical Method for Spherical Bubble Growth in Superheated Liquids, Computational Thermal Sciences, 2, (1), 2010, p19-31Journal Article, 2010, DOI , URL
• Gibbons, M. J., Garivalis, A. I., O"Shaughnessy, S. M., Robinson, A. J., Di Marco, P., Water droplet evaporation in varied gravity and electric fields, npj Microgravity, 10, (1), 2024Journal Article, 2024, DOI , URL , TARA - Full Text
• Alekos Ioannis Garivalis, Yan Chen, Evgeny Shatskiy, Anthony Robinson, Paolo Di Marco and Rocco Lupoi, Enhanced Pool Boiling Heat Transfer with Porous Ti- 6Al-4V-Coatings Produced by Cold Spray Metal Additive Manufacturing, Journal of Physics: Conference Series, 2766, 2024, p012130Journal Article, 2024, DOI , URL
• A Dynamic-Based Methodology for Optimising Insulation Retrofit to Reduce Total Carbon in, Creating a Roadmap Towards Circularity in the Built Environment, 2024, pp71-82 , [Rakshit, D.M., Robinson, A., Byrne, A.]Book Chapter, 2024, DOI , URL
• Naduvilakath-Mohammed, F.M., Lebon, M., Byrne, G., Robinson, A.J., An experimental investigation of vapor compression refrigeration cooling and energy performance for CPU thermal management, Case Studies in Thermal Engineering, 54, 2024Journal Article, 2024, DOI , URL
• Naduvilakath-Mohammed, F.M., Lebon, M., Robinson, A.J., Numerical modelling of a hybrid vapor compression refrigeration assisted closed loop liquid cooling system for high-performance computing systems, 9th European Thermal Sciences Conference (Eurotherm 2024), 2766, (1), 2024Conference Paper, 2024, DOI , URL
• Elkholy, A., Durfee, J., Mooney, J.P., Robinson, A.J., Kempers, R., A rate-of-rise facility for measuring properties of wick structures, Measurement Science and Technology, 34, (4), 2023Journal Article, 2023, DOI , URL
• Naduvilakath-Mohammed, F.M., Jenkins, R., Byrne, G., Robinson, A.J., Closed loop liquid cooling of high-powered CPUs: A case study on cooling performance and energy optimization, Case Studies in Thermal Engineering, 50, 2023Journal Article, 2023, DOI , URL
• Ahmadi, S., Eraghubi, M., Akhavan-Behabadi, M.A., Hanafizadeh, P., Sayadian, S., Robinson, A.J., EHD augmented heat transfer during upward bubbly flow boiling for low to medium frequency AC electric fields, International Journal of Thermal Sciences, 191, 2023Journal Article, 2023, DOI , URL
• Elliot, J.W., Byrne, G., Robinson, A.J., Optimising Impinging Microjet Arrays for Varying Heat Source Size in Liquid Cooled Coldplates, 2023 29th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC), 2023Conference Paper, 2023, DOI , URL
• T. Hughes, A.J. Robinson, S. McFadden, Competitive growth during directional solidification experiments of "1 1 1" Dendrites, Journal of Crystal Growth, 599, 2022, p126893Journal Article, 2022, DOI , URL
• T. Prevost, S. Battaglioli, Richard Jenkins, A.J. Robinson, Enhancing Jet Array Heat Transfer: Review of Geometric Features of Nozzle and Target Plates, International Journal of Thermofluids, 16, 2022, p100203Journal Article, 2022, DOI , URL
• J.W. Elliott, M.T. Lebon, A.J. Robinson, Optimising integrated heat spreaders with distributed heat transfer coefficients: A case study for CPU cooling, Case Studies in Thermal Engineering, 38, 2022, p102354Journal Article, 2022, DOI , URL
• A.J. Robinson, J. Colenbrander, D. Carballo, T. Deaville, J. Durfee, Roger Kempers, Simplified methods for characterizing thermal parameters of high-power automotive LEDs, Case Studies in Thermal Engineering, 35, 2022, p102157Journal Article, 2022, DOI , URL
• Lebon, M., Battaglioli, S., Jenkins, R., Parry, I., Robinson, A.J., Design and characterization of a sealed hybrid-cooled high performance computing server, 2022 28th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC), 2022Conference Paper, 2022, DOI , URL
• Battaglioli, S., Lebon, M., Jenkins, R., Summers, J., Sarkinen, J., Robinson, A.J., Enhancement of an Open Compute Project (OCP) server thermal management and waste heat recovery potential via hybrid liquid-cooling, 2022 28th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC), 2022Conference Paper, 2022, DOI , URL
• Sayadian, S., Ghassemi, M., Ahmadi, S., Robinson, A.J., Numerical analysis of transport phenomena in solid oxide fuel cell gas channels, Fuel, 311, 2022Journal Article, 2022, DOI , URL
• Muddu, R.D., Vincelas, F.F.C., Ghislain, T., Byrne, A., Robert, T., Robinson, A.J., The economic and environmental combination between building materials and fuel source to improve building energy performance, International Journal of Ambient Energy, 43, (1), 2022, p444-459Journal Article, 2022, DOI , URL
• Fazeel, M.N.M., Lebon, M., Byrne, G., Murray, G., Battagoli, S., Robinson, A.J., Thermal Performance of Miniature Vapour-Compression Refrigeration System for CPU Thermal Management, 2022 28th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC), 2022Conference Paper, 2022, DOI , URL
• Murray, G., Elliott, J.W., Jenkins, R., Lebon, M.T., Byrne, G., Robinson, A.J., Thermal-Hydraulic Characterisation of Electronics Cooling Liquids: A Case Study of Jet Impingement Coldplate on Emulated CPU, 2022 28th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC), 2022Conference Paper, 2022, DOI , URL
• Hughes, T., McFadden, S., Robinson, A.J., A front-tracking measurement technique for in-situ columnar and equiaxed structure growth with controlled solidification, Measurement Science and Technology, 32, (4), 2021Journal Article, 2021, DOI , URL
• Robinson, A.J., Colenbrander, J., Deaville, T., Durfee, J., Kempers, R., A wicked heat pipe fabricated using metal additive manufacturing, International Journal of Thermofluids, 12, 2021Journal Article, 2021, DOI , URL
• Sayadian, S., Ghassemi, M., Robinson, A.J., Multi-physics simulation of transport phenomena in planar proton-conducting solid oxide fuel cell, Journal of Power Sources, 481, 2021Journal Article, 2021, DOI , URL
• Hughes, T., Robinson, A.J., McFadden, S., Multiple dendrite tip tracking for in-situ directional solidification: Experiments and comparisons to theory, Materials Today Communications, 29, 2021Journal Article, 2021, DOI , URL
• Muddu, R.D., Gowda, D.M., Robinson, A.J., Byrne, A., Optimisation of retrofit wall insulation: An Irish case study, Energy and Buildings, 235, 2021Journal Article, 2021, DOI , URL
• Ahmadi, S., Hanafizadeh, P., Eraghubi, M., Robinson, A.J., Upward flow boiling of HFE-7000 in high frequency AC electric fields, International Journal of Thermofluids, 10, 2021Journal Article, 2021, DOI , URL
• Kempers, R., Colenbrander, J., Tan, W., Chen, R., Robinson, A.J., Experimental characterization of a hybrid impinging microjet-microchannel heat sink fabricated using high-volume metal additive manufacturing, International Journal of Thermofluids, 5-6, 2020Journal Article, 2020, DOI , URL
• Robinson, A.J., Smith, K., Hughes, T., Filippeschi, S., Heat and mass transfer for a small diameter thermosyphon with low fill ratio, International Journal of Thermofluids, 1-2, 2020Journal Article, 2020, DOI , URL
• Robinson, A.J., Colenbrander, J., Byrne, G., Burke, P., McEvoy, J., Kempers, R., Passive two-phase cooling of air circuit breakers in data center power distribution systems, International Journal of Electrical Power and Energy Systems, 121, 2020Journal Article, 2020, DOI , URL
• Smith, K., Kempers, R., Robinson, A., Siedel, S., Flow visualisation in a transparent thermosyphon: Influence of internal pressure, Proceedings of the 15th International Heat Transfer Conference, IHTC 2014, 2014Conference Paper, 2014, DOI
• Smith, K., Kempers, R., Robinson, A., Siedel, S., Flow visualisation in a transparent thermosyphon: Influence of internal pressure, Proceedings of the 15th International Heat Transfer Conference, IHTC 2014, 2014Conference Paper, 2014
• Robinson, A.J., Schnitzler, E., An experimental investigation of free and submerged miniature liquid jet array impingement heat transfer, Experimental Thermal and Fluid Science, 32, (1), 2007, p1-13Journal Article, 2007, DOI , URL
• Kempers, R., Kolodner, P., Lyons, A., Robinson, A.J., A high-precision apparatus for the characterization of thermal interface materials, Review of Scientific Instruments, 80, (9), 2009Journal Article, 2009, DOI , URL
• Robinson, A.J., Judd, R.L., The dynamics of spherical bubble growth, International Journal of Heat and Mass Transfer, 47, (23), 2004, p5101-5113Journal Article, 2004, DOI
• Yan Chen, Alekos Ioannis Garivalis, Evgeny Shatskiy, Anthony James Robinson, Paolo Di Marco, Shuo Yin and Rocco Lupoi, Nucleate Pool Boiling Enhancement on Ti64 Cold Spray Additive Manufacturing Coatings, Applied Thermal Engineering, 277, 2025, p127126Journal Article, 2025, DOI , URL
• Kangude, P. , Kumavat, P.S. , Shatskiy, E. , Robinson, A.J., Numerical investigation of tip clearance designs for oblique-cut fin microchannels, Applied Thermal Engineering, 257, 2024, p124415-Journal Article, 2024, DOI , URL
• Gerard McGranaghan, A.J. Robinson, CONVECTIVE BOILING WITH ELECTROHYDRODYNAMIC ENHANCEMENT: THE INFLUENCE OF INLET QUALITY, Interfacial phenomena and heat transfer, 4, (1), 2016, p55 - 69, p55-69Journal Article, 2016, DOI , URL
• Alessandro Franco, Kate Smith, Samuel Siedel, A.J. Robinson, Roger Kempers, VISUAL STUDY OF FLUID DYNAMICS IN WICKLESS TRANSPARENT HEAT PIPES, Heat Pipe Science and Technology An International Journal, 5, (1-4), 2014, p161 - 167, p161-167Journal Article, 2014, DOI
• Kate Smith, Samuel Siedel, A.J. Robinson, Roger Kempers, INVESTIGATION OF THERMOSYPHON PERFORMANCE WITH CHANGING ADIABATIC SECTION GEOMETRY, Heat Pipe Science and Technology An International Journal, 5, (1-4), 2014, p231 - 236, p231-236Journal Article, 2014, DOI
• Jonathan Elliott, Anthony Robinson, Optimisation of liquid jet impingement coldplate for an overclocked CPU with multiple discrete cores, Thermal Science and Engineering Progress, 67, 2025, p104221Journal Article, 2025, DOI , URL
• J. W. Elliott, A. J. Robinson, Optimized Liquid Impinging Jet Arrays for Cooling CPU Packages, IEEE Transactions on Components, Packaging and Manufacturing Technology, 15, (3), 2025, p488-505Journal Article, 2025, DOI , URL
• J W Elliott, G Byrne, A J Robinson, Optimising liquid impingement jet arrays for concentrated heat sources, Journal of Physics: Conference Series, (2766), 2024, p012001Journal Article, 2024, DOI , URL
• Heated meter bars technique: what you should know and why in, he Art of Measuring in the Thermal Sciences, CRC Press, CRC Press, 2020, [Roger Kempers, AJ Robinson]Book Chapter, 2020, DOI , URL
• Richard Jenkins; Michel Lebon; Anthony Robinson; Cathal Wilson, 'Sealed rack server unit', Nexalus Ltd, WO2024245864A1, 2024, 18 August 2026, Nexalus LtdPatent, 2024, URL
• Richard Jenkins; Michel Lebon; Anthony Robinson; Cathal Wilson, 'Server Enclosure', Nexalus Ltd, GB2406061.8, 2025, 18 August 2026, Nexalus LtdPatent, 2025
• Richard Jenkins; Michel Lebon; Anthony Robinson; Cathal Wilson, 'Computing Server Unit with Sealed Enclosure and Liquid Cooling', Nexalus Ltd, WO2024245864A1, 2024, 18 August 2026, Nexalus LtdPatent, 2024
• Glynn, C., Robinson A.J., Murray D.B. and Lupton T., "Microscale Heat Transfer of Confined Miniature Jets", ASME, 4th International Conference on Nanochannels, Microchannels and Minichannels, Limerick, Ireland, June, 2006, (ICNMM2006-96191 ), 2006Conference Paper, 2006
• Cotton, J., Robinson, A.J., Shoukri, M., Chang, J.S. , A two-phase flow pattern map for annular channels under a DC applied voltage and the application to electrohydrodynamic convective boiling analysis, International Journal of Heat and Mass Transfer , 48, (25-26), 2005, p5536 - 5579Journal Article, 2005, DOI
• Brian P. Whelan, Anthony J. Robinson, The effect of nozzle geometry on pressure drop and heat transfer to free surface liquid jet arrays, 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007, ASME--JSME Thermal Engineering Summer, Vancouver, British Columbia, CANADA, July 8 - 12, 2007, pp747-756Conference Paper, 2007, DOI
• Thomas L. Lupton Darina B. Murray Anthony J. Robinson, Confinement effects in heat transfer to a miniature compressible impinging air jet, 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007, ASME-JSME Thermal Engineering Summer, Vancouver, British Columbia, CANADA, July 8-12, 2, 2007, pp671-679Conference Paper, 2007, DOI
• R. Kempers, A. Robinson, D. Ewing and C.Y. Ching, Characterization of Evaporator and Condenser Thermal Resistances of a Screen Mesh Wicked Heat Pipe, International Journal of Heat and Mass Transfer, 51, (25-26), 2008, p6039 - 6046Journal Article, 2008, DOI , URL
• A.J. Robinson, Heat Transfer Near the Contact Line During Boiling in Microgravity, TWO-PHASE SYSTEMS FOR GROUND AND SPACE APPLICATIONS, Kyoto, Japan, October 26-28, 2007, 2007Conference Paper, 2007
• A.J. Robinson, Heat Transfer Near the Contact Line During Boiling in Microgravity, Microgravity Science and Technology, 19, (3-4), 2007, p139 - 140Journal Article, 2007, DOI
• Lee, C.K., Robinson, A.J., O'Donnell, G.E., Verheggen, J., Ching, C.Y., Development of Electrohydrodynamic micropump for microscale electronics cooling, 24th International Manufacturing Conference, Waterford, Ireland, 29th-30th August, edited by Phelan, J. , 2007Conference Paper, 2007
• Glynn, C., Robinson, A.J., Murray, D.B., Lupton, T.L. , Microscale heat transfer of confined miniature jets, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006 A, 2006, pp319-328Conference Paper, 2006, DOI
• Lupton, T., Robinson, A.J and Murray, D.B., , Heat transfer from micro impinging jet arrays, ", ECI International Conference on Heat Transfer and Fluid Flow in Microscale, Whistler, British Columbia, Canada, Sept 21-26, 2008, 2008, pp8ppConference Paper, 2008
• Kerrigan. K., Jouhara, H., Robinson, A., O'Donnell, G.E., Investigating the DFM approach to the development of a thermally optimised finned tube heat exchanger, 25th International Manufacturing Conference, Dublin Institute of Technology, Dublin, Ireland, 3 - 5 Sept, edited by Robert Simpson , 2008, pp539 - 548Conference Paper, 2008
• A. J. Robinson, A Thermal-Hydraulic Comparison of Liquid Microchannel and Impinging Liquid Jet Array Heat Sinks for High Power Electronics Cooling, IEEE Transactions on Components and Packaging Technologies, 32, (2), 2009, p347 - 357Journal Article, 2009, DOI , URL , TARA - Full Text
• Brian P. Whelan, Anthony J. Robinson, Nozzle Geometry Effects in Liquid Jet Array Impingement, Applied Thermal Engineering, 29, (11-12), 2009, p2211 - 2221Journal Article, 2009, DOI , URL , TARA - Full Text
• O'Shaughnessy, S.M., Robinson, A.J., The Influence of the Magnitude of Gravitational Acceleration on the Marangoni Convection about an Isolated Bubble under a Heated Wall, Heat Transfer Engineering, 30, (13), 2009, p1096 - 1107Journal Article, 2009, DOI , URL , TARA - Full Text
• Jouhara, H., Robinson, A.J., An Experimental Study of Wickless Heat Pipes operating in the Temperature Range 200ºC to 450ºC, Heat Transfer Engineering, 30, (13), 2009, p1041-1048Journal Article, 2009, DOI , URL
• O'Shaughnessy, S.M., Robinson, A.J., Numerical Investigation of Bubble Induced Marangoni Convection: Some Aspects of Bubble Geometry, Microgravity Science and Technology, 20, (3-4), 2008, p319 - 325Journal Article, 2008, DOI , URL , TARA - Full Text
• Cristina Radulescu and Anthony J. Robinson, The influence of gravity and confinement on Marangoni flow and heat transfer around a bubble in a cavity: A numerical study, Microgravity Science and Technology, 20, (3-4), 2008, p253 - 259Journal Article, 2008, DOI
• A.J. Robinson, G. O'Donnell, J. Verheggen, C.Y. Ching, Development of a Novel Electrohydrodynamic Micropump with 3-D Electrode Geometry, Proceedings of the 1st European Conference on Microfluidics , Bologna, Italy, December 10-12, 2008, 2008Conference Paper, 2008
• Lupton, T.L., Murray, D.B., and Robinson, A.J., The Effect of Varying Confinement Levels on the Heat Transfer to a Miniature Impinging Air Jet, Eurotherm 2008, Eindhoven, Netherlands, May 18-22, 2008, 2008Conference Paper, 2008
• Jouhara, H., Martinet, O., and Robinson, A.J., Experimental Study of Small Diameter Thermosyphons Charged with Water, FC-84, FC-77 & FC-3283, Eurotherm 2008, Eindhoven, Netherlands, May 18-22, 2008Conference Paper, 2008, URL
• Whelan, B., and Robinson, A.J., Effect of Nozzle Geometry on Pressure Drop and Heat Transfer to Both Free-Surface and Submerged Liquid Jet Arrays, Eurotherm 2008, Eindhoven, Netherlands, May 18-22, 2008, 2008Conference Paper, 2008
• O'Shaughnessy, S.M., and Robinson, A.J., Numerical Investigation of Marangoni Convection caused by the Presence of a Bubble Situated under a Uniformly Heated Surface: Influence of Gravity Level, UK National Heat Transfer Conference, Edinburgh, Scotland, September 10-11, 200, 2007Conference Paper, 2007
• Whelan, B., and Robinson, A.J., Effect of Nozzle Shape on Pressure Drop and Heat Transfer to Both Free-Surface and Submerged Liquid Jet Arrays, UK National Heat Transfer Conference, Edinburgh, Scotland, Sept 10-11, 2007, 2007Conference Paper, 2007
• Jouhara, H., Kelly, C.H., and Robinson, A.J., An Experimental Study of Wickless Miniature Heat Pipes operating in the Temperature Range 200ºC to 450ºC, UK National Heat Transfer Conference, Edinburgh, Scotland, Sept 10-11, 2007, 2007Conference Paper, 2007
• 2Lupton, T.L., Murray, D.B., and Robinson, A.J., IR Thermography Measurement of Impinging Jet Heat Transfer from a Heated Thin Foil, UK National Heat Transfer Conference, Edinburgh, Scotland, Sept 10-11, 2007, 2007Conference Paper, 2007
• Lesage, F., Robinson, A.J., Numerical Method for Spherical Bubble Growth in Superheated Liquids, ICHMT International Symposium on Advances in Computational Heat Transfer, Marrakech, Morocco, May 11-16, 2008, 2008Conference Paper, 2008
• Lee, C.K., A.J. Robinson, A.J., and Ching, C.Y, Development of EHD Ion-Drag Micropump for Microscale Electronics Cooling, 13th Workshop on Thermal Issues in ICs and Systems, Budapest, Hungary, Sept 17-19, 2007, 2007Conference Paper, 2007, DOI
• O'Shaughnessy, S.M., and Robinson, A.J., Numerical Investigation of Marangoni Convection Caused by the Presence of a Bubble on a Uniformly Heated Surface, Interdisciplinary Transport Phenomena V: Fluid, Thermal, Biological, Materials and Space Sciences, Bansko, Bulgaria, October 14-19, 2007, 2007Conference Paper, 2007
• O'Shaughnessy, S.M., Robinson, A.J., Numerical Investigation of Marangoni Convection around a Bubble, ICHMT International Symposium on Advances in Computational Heat Transfer, Marrakech, Morocco, May 11-16, 2008, 2008Conference Paper, 2008
• Cristina Radulescu, Anthony J. Robinson, Numerical Study of Marangoni-Thermocapillary Convection Influence during Boiling Heat Transfer in Minichannels, ASME 6th International Conference on Nanochannels, Microchannels and Minichannels, Darmstadt Germany, edited by June 22-25, 2008 , 2008Conference Paper, 2008, DOI
• R. Kempers, P. Kolodner, A. Lyons, A.J. Robinson, Development of a high- accuracy thermal interface material tester, ITherm08, Orlando, Florida, May 2008, 2008Conference Paper, 2008, DOI
• Stephen D. Thorpe, Conor T. Buckley, Fergal J. O'Brien, Anthony J. Robinson and Daniel J. Kelly, Fabrication methodologies regulate the initial mechanical properties of cell seeded hydrogels, 16th Congress of the European Society of Biomechanics, Lucern, Switzerland, July 6-9, 2008, 2008Conference Paper, 2008
• Buckley, C.T., Thorpe, S.D., O'Brien, F.J., Robinson, A.J., Kelly, D.J. , The effect of concentration, cooling rate and cell seeding density on the initial mechanical properties of agarose hydrogels., Mechanical Behaviour of Biomedical Materials , 2, (5), 2009, p512 - 521Journal Article, 2009, DOI , TARA - Full Text
• H. Jouhara, A.J. Robinson, Experimental Investigation of Small Diameter Two-Phase Closed Thermosyphons Charged with Water, FC-84, FC-77 & FC-3283, Applied Thermal Engineering, 30, (2-3), 2010, p201-207Journal Article, 2010, DOI , URL
• A.J. Robinson, Depressurization Effects on the Thermal Fields and Heat Transfer During Hemispherical Bubble Growth on a Heated Surface, Computational Thermal Sciences, 2, (4), 2010, p341 - 358Journal Article, 2010, DOI
• C. Radulescu, and A.J. Robinson, Mixed Convective Heat Transfer due to Forced and Thermocapillary Flow around Bubbles in a Miniature Channel: A 2D Numerical Study, Heat Transfer Engineering, 31, (5), 2010, p335- 343Journal Article, 2010, DOI , URL
• T. Lupton, A. Robinson, D. Murray , Local Heat Transfer from Micro Impinging Jet Arrays, ExHFT-7, Krakow, Poland, 28 June - 03 July, 2009Conference Paper, 2009
• S.M. O'Shaughnessy, A.J. Robinson, Numerical Investigation of Bubble Induced Marangoni Convection: Influence of Bubble Size and Shape, Third International Topical Team Workshop on Two-Phase Systems for Ground and Space Applications, Brussels, Belgium, September 10-12, 2008Conference Paper, 2008
• A.J. Robinson, G. O'Donnell, J. Verheggen, C.Y. Ching, Development of a Novel Electrohydrodynamic Micropump with 3-D Electrode Geometry, 1st European Conference on Microfluidics - uFlu 2008, Bologna, Italy, December 10-12, 2008Conference Paper, 2008
• F. J. Lesage, J.S. Cotton, A.J. Robinson, An equation of motion for bubble growth, ECI International Conference on Boiling Heat Transfer, Florianópolis, Brazil, 3-7 May, 2009Conference Paper, 2009
• Sergio Di Bari, Anthony J. Robinson, Experimental study of bubble growth from a submerged orifice considering the dynamic pressure field, ECI International Conference on Boiling Heat Transfer, Florianópolis,Brazil, 3-7 May, 2009Conference Paper, 2009
• R. Kempers, R. Frizzell, A. Lyons, A.J. Robinson, Development of a Metal Micro-Textured Thermal Interface Material, Proceedings of the ASME InterPack Conference 2009, IPACK2009, InterPACK 2009-89366, San Francisco, California, USA, July 19-23, 2009, pp587 - 595Conference Paper, 2009, DOI
• K. Kerrigan, H. Jouhara, G.E. O'Donnell, A. J. Robinson, Heat pipe-based radiator for low grade geothermal energy conversion in domestic space heating, 3rd International Conference on Sustainable Energy & Environmental Protection, August 12-15, 2009Conference Paper, 2009
• R. Kempers, A.J. Robinson & A. Lyons , Characterization of Thermal Contact Resistance in Metal Micro-Textured Thermal Interface Materials using Electrical Contact Resistance Measurements, Defect and Diffusion Forum, 5th International Conference on Diffusion in Solids and Liquids - Mass Transfer, Heat Transfer and Microstructure and Properties, Rome, Italy, 24-26 June, 297, (301), 2009, pp1190-1198Conference Paper, 2009, DOI
• Jouhara, H., and Robinson, A.J., A Heat Exchanger, 2008Patent, 2008
• Buckley, C.T., Kelly, D.J., Robinson, A.J., O'Brien, F., A Mixing Device, 2008Patent, 2008
• Robinson, A.J., O'Connell, W., Nikolic, D., A Lantern, 2009Patent, 2009
• A.J. Robinson, G.E. O'Donnell, J. Verheggen, P.R. Selvaganapathy, C.Y. Ching, Development of a novel Electrohydrodynamic Micropump with 3D Electrode Geometry, International Journal of Heat and Technology, 28, (1), 2010, p89 - 94Journal Article, 2010
• R. Kempers, A. Lyons, A.J. Robinson, Characterization of Metal Micro-Textured Thermal Interface Materials, 15th International Workshop on Thermal investigations of ICs and Systems, Leuven, Belgium, 7-9 October, 2009Conference Paper, 2009
• D. Nikolić, A.J. Robinson, Hot Spot Targeting with a Liquid Impinging Jet Array Waterblock, 15th International Workshop on Thermal investigations of ICs and Systems, Leuven, Belgium, 7-9 October, 2009Conference Paper, 2009
• Lupton, T., Robinson, A., and Murray, D. , Local heat transfer from micro impinging jet arrays, 7th World Conference on Experimental Heat Transfer, Fluids Mechanics and Thermodynamics, Krakow, Poland, June , 2009, pp8Conference Paper, 2009, TARA - Full Text
• K. Kerrigan, H. Jouhara, G.E. O'Donnell and A.J. Robinson, Heat pipe-based radiator for low grade geothermal energy conversion in domestic space heating, Simulation Modelling Practice and Theory, 19, (4), 2011, p1154-1163Journal Article, 2011, DOI , URL , TARA - Full Text
• S. Siedel, S. Cioulachtjian, A.J. Robinson and J. Bonjour, Electric field effects during nucleate boiling from an artificial nucleation site, Experimental Thermal and Fluid Science, 35, (5), 2011, p762-771Journal Article, 2011, DOI , URL , TARA - Full Text
• Donoghue, D.B., Delaure, Y.M.C., Robinson, A.J. and Murray, D.B., Heat Transfer Enhancement from Bouncing Bubble Dynamics, Proceedings of the 6th Baltic Heat Transfer Conference, Tampere, Finland, August 2011, 2011Conference Paper, 2011, TARA - Full Text
• B.P. Whelan, R.S. Kempers, A.J. Robinson, A Liquid-Based System for CPU Cooling Implementing a Jet Array Impingement Waterblock and a Tube Array Remote Heat Exchanger, Applied Thermal Engineering, 39, 2012, p86-94Journal Article, 2012, DOI , URL , TARA - Full Text
• J.S. Cotton, A.J. Robinson, M. Shoukri, J.S. Chang, AC Voltage Induced Electrohydrodynamic Two-Phase Convective Boiling Heat Transfer in Horizontal Annular Channels, Experimental Thermal and Fluid Science, 41, 2012, p31-42Journal Article, 2012, DOI , URL , TARA - Full Text
• S. Siedel, S. Cioulachtjian, A.J. Robinson, J. Bonjour, Experimental Investigation on the Local Curvature of the Bubble Interface during Boiling on a Single Nucleation site, Heat Transfer Engineering, 35, (5), 2013, p528 - 536Journal Article, 2013
• S. Di Bari, A.J. Robinson, Adiabatic Bubble Growth in DC Electric Fields, Experimental Thermal and Fluid Science, 44, 2013, p114 - 123Journal Article, 2013, DOI , URL
• J. Brix Due, A.J. Robinson, Reliability of Thermal Interface Materials: A Review, Applied Thermal Engineering, 50, 2013, p455-463Journal Article, 2013, DOI , URL
• S.M. O'Shaughnessy, M. Deasy, C. Kinsella, V. Doyle, A.J. Robinson, Small Scale Electricity Generation from a Portable Biomass Cookstove: Prototype Design and Preliminary Results, Applied Energy, 102, (0), 2013, p374 - 385Journal Article, 2013, DOI , URL , TARA - Full Text
• S. Di Bari, A.J. Robinson, Experimental Study of Gas Injected Bubble Growth from Submerged Orifices, Experimental Thermal and Fluid Science, 44, 2013, p123 - 137Journal Article, 2013, DOI , URL , TARA - Full Text
• R. Kempers, A.J. Robinson, A. Lyons, Modelling the Compressive Deformation of Metal Micro-Textured Thermal Interface Materials using SEM Geometry Reconstruction, Computers and Structures, 92-93, 2012, p216-228Journal Article, 2012, DOI , URL
• S. Siedel, S. Cioulachtjian, A.J. Robinson, J. Bonjour, EHD effects on bubble shape when boiling, International Symposium on Electrohydrodynamics, Gdańsk, Poland, September 23-26, 2012Conference Paper, 2012
• G. McGranaghan, J.S. Cotton, A.J. Robinson, EHD augmentation and control of heat transfer rates during convective boiling, International Symposium on Electrohydrodynamics, Gdańsk, Poland., September 23-26, 2012Conference Paper, 2012
• Donnelly, A.J. Robinson, Y.M.C. Delaure, D.B. Murray, Sliding bubble dynamics and the effects on surface heat transfer, Journal of Physics: Conference Series, EUROTHERM 2012, Potiers, France, Sept. 4-7, 2012, pp012180-Conference Paper, 2012, DOI , URL , TARA - Full Text
• S. M. O'Shaughnessy, A. J. Robinson, Numerical investigation of bubble-induced marangoni convection, Interdisciplinary Transport Phenomena: Ann. N.Y. Acad. Sci, 1161, 2009, p304 - 320Journal Article, 2009, DOI , URL , TARA - Full Text
• Donoghue, D.B., Delaure, Y.M.C., Robinson, A.J. and Murray, D.B., Bouncing bubble dynamics and associated enhancement of heat transfer, Journal of Physics: Conference Series, 6th European Thermal Sciences Conference, Poitiers, France, September 2012, edited by IoP Conference Series , 395, (1), 2012, pp012167-Conference Paper, 2012, DOI
• D. B. Donoghue, A. Albadawi, Y. M. C. Delauré, A.J. Robinson, D. B. Murray,, Bubble Impingement and the Mechanisms of Heat Transfer, International Journal of Heat and Mass Transfer, 71, 2014, p439-450Journal Article, 2014, DOI , URL , TARA - Full Text
• G. McGranaghan, A.J. Robinson, The Mechanisms of Heat Transfer during Convective Boiling Under the Influence of AC Electric Fields, International Journal of Heat and Mass Transfer, 73, 2014, p376-388Journal Article, 2014, DOI , URL
• S. Siedel, S. Cioulachtjian, A.J. Robinson, J. Bonjour, Integral Momentum Balance on a Growing Bubble, Physics of Fluids, 25, 2013, p123301Journal Article, 2013, DOI , URL , TARA - Full Text
• S.M. O'Shaughnessy, M.J. Deasy, J.V. Doyle, A.J. Robinson, Field Trial Testing of an Electricity-Producing Portable Biomass Cooking Stove in Rural Malawi, Energy for Sustainable Development, 20, (1), 2014, p1 - 10Journal Article, 2014, DOI , URL , TARA - Full Text
• S.M. O'Shaughnessy, A.J. Robinson, Convective heat transfer due to thermal Marangoni flow about two bubbles on a heated wall, International Journal of Thermal Sciences, 78, 2014, p101 - 110Journal Article, 2014, DOI , URL , TARA - Full Text
• C.E. Kinsella, S.M. O'Shaughnessy, M.J. Deasy, M. Duffy, A.J. Robinson, Battery Charging Considerations in Small Scale Electricity Generation from a Thermoelectric Module, Applied Energy, 114, 2014, p80 - 90Journal Article, 2014, DOI , URL , TARA - Full Text
• F.J. Lesage, J.S. Cotton, A.J. Robinson, Modelling of quasi-static adiabatic bubble formation, growth and detachment for low Bond numbers, Chemical Engineering Science, 104, 2013, p742 - 754Journal Article, 2013, DOI , URL
• S. Siedel, S. Cioulachtjian, A.J. Robinson, J. Bonjour, Bubble distortion due to EHD stress, International Journal of Plasma, Environmental Science & Technology, 7, (1), 2013, p37 - 43Journal Article, 2013
• S. Di Bari, D. Lakehal, A.J. Robinson, A Numerical Study of Quasi-Static Gas Injected Bubble Growth: Some Aspects of Gravity, International Journal of Heat & Mass Transfer, 64, 2013, p468 - 482Journal Article, 2013, DOI , URL
• F. Lesage, J.S. Cotton, A.J. Robinson, Analysis of quasi-static vapour bubble shape during growth and departure, Physics of Fluids, 25, (6), 2013, p067103-1-21Journal Article, 2013, DOI , URL , TARA - Full Text
• R. Kempers, A.M. Lyons, A.J. Robinson, Modelling and experimental characterization of metal micro-textured thermal interface materials, ASME Journal of Heat Transfer, 136, 2013, p011301Journal Article, 2013, DOI , URL
• K. Kerrigan, G.E. O'Donnell, H. Jouhara, A.J. Robinson, A naturally aspirated convector for domestic heating application with low temperature sources, Energy in Buildings, 67, 2013, p187 - 194Journal Article, 2013, DOI , URL
• S.M. O'Shaughnessy, A.J. Robinson, Heat Transfer near an isolated gas bubble: The Combined Influence of Thermocapillarity and Buoyancy, International Journal of Heat & Mass Transfer, 62, 2013, p422 - 434Journal Article, 2013, DOI , URL , TARA - Full Text
• A. Albadawi, D. B. Donoghue, A.J. Robinson, D. B. Murray, Y. M. C. Delauré, Influence of surface tension implementation in Volume of Fluid and coupled Volume of Fluid with Level Set methods for bubble growth and detachment, International Journal of Multiphase Flow, 53, 2013, p11 - 28Journal Article, 2013, DOI , URL
• K. Smith, S. Siedel, R.S. Kempers, A.J. Robinson, Visual Study of Fluid Dynamics in Wickless Transparent Heat Pipes, 17th International Heat Pipe Conference (17th IHPC), Kanpur, India, October 13-17, 2013Conference Paper, 2013
• K. Smith, S. Siedel, R.S. Kempers, A.J. Robinson, Investigation of Thermosyphon Performance with Changing Adiabatic Section Geometry, 17th International Heat Pipe Conference (17th IHPC), Kanpur, India, October 13-17, 2013Conference Paper, 2013
• D.B. Donoghue, A. Albadawi, Y.M.C Delauré, A.J. Robinson, D.B. Murray, Wake effects from a Rising Air Bubble Impacting a Horizontal Heated Surface, 8th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics, Lisbon, Portugal, June 16-20, 2013Conference Paper, 2013, TARA - Full Text
• M. Gibbons, S. Finnegan, M. Maguire, S. O'Dea, A.J. Robinson, Heat Transfer Characterization of a Single Source Ultra-Low Flow Rate Electrospray, 8th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics, Lisbon, Portugal, June 16-20, 2013Conference Paper, 2013, TARA - Full Text
• K. Smith, S. Siedel, L. Akalanne, R.S. Kempers, A.J. Robinson, Investigation of a Naturally Aspirated Thermosyphon for Power Amplifier Cooling, 8th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics, Lisbon, Portugal, June 16-20, 2013Conference Paper, 2013
• G. McGranaghan, A.J. Robinson, The Effect of Vapour Quality on EHD Augmented Flow Boiling, International Conference on Mechanical Engineering and Mechatronics, Toronto, Ontario, Canada, August 8-10, 2013Conference Paper, 2013
• R. Farrelly, K. Brown, S. Nolan, S. Siedel, G. O'Donnell, C. Wilson, A.J. Robinson, A Test Facility for Characterizing Infrared Heaters, International Conference on Mechanical Engineering and Mechatronics, Toronto, Ontario, Canada, August 8-10, 2013Conference Paper, 2013
• McGranaghan, G, Robinson, AJ, EHD Augmented Convective Boiling: Flow Regimes and Enhanced Heat Transfer, Heat Transfer Engineering, 35, (5), 2014, p517-527Journal Article, 2014, DOI , URL
• Siedel, S, Cioulachtjian, S, Di Bari, S, Robinson, AJ, Bonjour, J, Analysis of the Interface Curvature Evolution During Bubble Growth, Heat Transfer Engineering, 35, (5), 2014, p528-536Journal Article, 2014, DOI , URL
• Kempers, R, Lyons, AM, Robinson, AJ, Modeling and Experimental Characterization of Metal Microtextured Thermal Interface Materials, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 136, (1), 2014, p011301-Journal Article, 2014, DOI , URL
• Albadawi, A, Donoghue, DB, Robinson, AJ, Murray, DB, Delaure, YMC, On the analysis of bubble growth and detachment at low Capillary and Bond numbers using Volume of Fluid and Level Set methods, CHEMICAL ENGINEERING SCIENCE, 90, 2013, p77-91Journal Article, 2013, DOI , URL
• Di Bari, S., Cotton, J.S., Robinson, A.J., Numerical simulation of exhaust gas cooling in channels with periodic elbows for application in compact heat recovery systems, Journal of Physics: Conference Series, 6th European Thermal Sciences Conference, Eurotherm 2012, Poitier, France, 4-7 Sept, 2012, pp012041-Conference Paper, 2012, DOI
• Albadawi, A. , Delauré, Y. , Donoghue, D.B., Robinson, A., Murray, D.B, Numerical investigation of volume of fluidand level set interface capturing methods for bubble growth and detachment, Journal of Physics: Conference Series, Journal of Physics: Conference Series, Poitier, France, 4-7 Sept, 395, (1), 2012, pp012166-Conference Paper, 2012, DOI
• S.M. O'Shaughnessy, M.J. Deasy, C.E. Kinsella, V. Doyle, A.J. Robinson, Prototype Design and Testing of a Portable Biomass Cookstove Electricity Generator In Rural Malawi,, National Research Dissemination Conference, Lilongwe, Malawi, May 16-18, 2012, pp5ppConference Paper, 2012
• S.M. O'Shaughnessy, M. Deasy, C. Kinsella, W. O'Connell, A.J. Robinson, Micro-generation of electricity from a biomass cooking stove using a thermoelectric generator,, The Intel European Research and Innovation Conference, Ireland, 2011, 2011, pp5ppConference Paper, 2011
• Robinson, A.J., O'Connell, W., Sustainable Distributed Electricity Generation for Off-Grid Electrification of Developing Countries, The Intel European Research and Innovation Conference, Ireland, 2010, 2010, pp5ppConference Paper, 2010

• Anthony Robinson; Cathal Wilson; Leo Celdran; Nicolas Baudin, 'Liquid-based heat exchanger', Trinity College Dublin, EP3830866B1, 2024, 18 August 2026, Trinity College DublinPatent, URL
• Anthony James Robinson; Rocco Lupoi, 'Thermal structures for dissipating heat and methods for manufacture thereof', Trinity College Dublin, 2021, 18 August 2026, Trinity College DublinPatent, URL
• Cathal Wilson; Nicolas Baudin; Raphael Cagnin; Anthony Robinson, 'Liquid cooled server module', Trinity College Dublin, GB2576032B, 2021, 18 August 2026, Trinity College DublinPatent, URL
• Roger Scott Kempers; Paul Ahern; Alan Michael Lyons; Anthony Robinson, 'Structure for a heat transfer interface and method of manufacturing the same', Trinity College Dublin, US11032942B2, 2021, 18 August 2026, Trinity College Dublin / Alcatel Lucent SASPatent, URL
• Anthony Robinson; Cathal Wilson; Kenneth O'Mahony, 'Cooling device for cooling components of a circuit board', Nexalus Ltd, EP4190137B1, 2024, 18 August 2026, Nexalus LtdPatent, URL
• Anthony Robinson; Cathal Wilson; Kenneth O'Mahony, 'Modular thermal heat sink device', Nexalus Ltd, US12063756B2, 2024, 18 August 2026, Nexalus LtdPatent, URL
• Sergio Di Bari and Anthony J. Robinson, Numerical Simulation of Bubble Growth from a Submerged Orifice Imbedded in a Flat Surface, Proceedings of the Joint Symposium on Advances in Mechanics, Joint Symposium on Advances in Mechanics, Dublin, Ireland., Irish Mechanics Society, 2008Conference Paper
• Radulescu C. and Robinson A.J., Numerical study of the confinement influence on Marangoni - thermocapillary convection around a bubble of fixed shape, Proceedings of the Joint Symposium on Advances in Mechanics, Joint Symposium on Advances in Mechanics, Dublin, Ireland, Irish Mechanics Society, 2008Conference Paper
• R. O'Connor, K. Kerrigan, G. Vigna, H. Jouhara, A. J. Robinson, Finite Element Modelling Analysis of the Effective Thermal Conductivity in Liquid Saturated Wicks, Proceedings of the Joint Symposium on Advances in Mechanics, Joint Symposium on Advances in Mechanics, Dublin, Ireland., Irish Mechanics Society, 2008Conference Paper
• K. Kerrigan, R. O'Connor, H. Jouhara, A.J. Robinson, G.E. O'Donnell, Thermal Performance Predictions of Finned-Tube Bundles Using Numerical Methods, Proceedings of the Joint Symposium on Advances in Mechanics, Joint Symposium on Advances in Mechanics, Dublin, Ireland, Irish Mechanics Society, 2008Conference Paper

• Title

  Reliability of Thermal Interface Materials
  Summary
  Funding Agency

  Siemens Wind Power
  Date From

  2012
• Title

  Thermal Management of Remote Radio Heads
  Summary

  This project involves the development of aggressive cooling solutions for telecoms hardware, in particular Remote Radio Heads (RRHs).
  Funding Agency

  IRCSET & Alcatel Lucent
  Date From

  2012
  Date To

  2014
• Title

  Development of Infrared and Energy Assessment Methodologies and Tools
  Summary

  A novel measurement device is being designed to assess the performance of energy efficient infrared heating elements.
  Funding Agency

  Enterprise Ireland & Ceramicx Ltd.
  Date From

  Sept 2012
  Date To

  Feb 2014
• Title

  Variable Conductance Heat Pipe
  Summary

  Heat Pipes (HP) are efficient, low cost and simple phase change heat transfer devices. Recently they have been implemented in commercial applications to transfer heat from a centralized source and disperse it for cooling and heating applications alike. In addition to the advantages of the HP, the Variable Conductance Heat Pipe (VCHP) incorporates a non-condensable gas into the pipe to control the amount of heat that can be transferred through it.
  Funding Agency

  Enterprise Ireland
  Date From

  July 07
  Date To

  June 09
• Title

  The mPower Stove
  Summary

  This project has developed an electrical generator system tha uses the heat from efficient biomass cookstoves as the energy source. The generators have been tested in Malawi, africa.
  Funding Agency

  Irish Aid, Intel
  Date From

  Dec 2010
  Date To

  May 2012
• Title

  Distributed Micro-Power Generation for Africa based on an Ultra Low Cost Gasified Cook Stove
  Summary
  Funding Agency

  Ministry of Foreign Affairs: Irish Aid
  Date From

  01/09/2010
• Title

  Synthetic Miniature Jet Electronics Cooler
  Summary

  Thermal hardware will be developed that incorporates an array of micro impinging synthetic jets to cool electronic packages. The new thermal package is an economical, compact, efficient and reliable replacement for conventional rotary fan-based cooling units.
  
  Commercial potential for the novel cooling system is immense considering that an escalating number of electronic systems are becoming thermally limited.
  Funding Agency

  Enterprise Ireland
  Date From

  Oct. 2006
  Date To

  Oct. 2007
• Title

  The Mechanisms of Heat Transfer during Nucleate Pool Boiling
  Summary

  A Direct Numerical Simulation of bubble growth on a heated surface will be performed. The physical model will incorporate important aspects of boiling, such as thermocapillary convection, that have previously been ignored. The efficacy and accuracy of the physical model and solution technique will be assured by validation with new bubble growth measurements with spatially and temporally resolved surface measurements in the vicinity of the bubbles. The intricate coupling between the bubble growth and the mechanisms responsible for heat removal during boiling will be elucidated for different boiling conditions including terrestrial and microgravity environments.
  Funding Agency

  Science Foundation Ireland
  Date From

  Oct. 2007
  Date To

  Sept. 2010
• Title

  Liquid jet impingement heat transfer to arrays of miniature jets
  Summary

  Liquid-based thermal management hardware is being developed based on the science of impinging liquid jet arrays. This work targets the optimisation of the heat tranfer with regard to minimum pumping power penalty by investigating the influence of orifice geometry on the heat transfer & pressur drop.
  Funding Agency

  SFI
  Date From

  Oct. 2006
  Date To

  Oct. 2009
• Title

  A novel device to control in situ the thermal gelation and concentration of cell-seeded hydrogels
  Summary

  It is believed that injuries to cartilage predispose a person to osteoarthritis in later life and eventually to a requirement for joint replacement surgery. Injectable chondrocyte-seeded hydrogels can potentially be used to fill cartilage defects with a functional repair tissue. Ensuring that the hydrogel has the appropriate mechanical properties in situ (e.g. stiffness, permeability, porosity) is critical for successful repair. The objective of this project is to develop a clinical device capable of controlling the hydrogel concentration and the rate of cooling during gelation in situ, which can be used to alter the depth dependant mechanical properties of the construct.
  Funding Agency

  Enterprise Ireland
  Date From

  Jan. 2007
  Date To

  Jan. 2009
• Title

  The effect of thermocapillary convection on the heat transfer near a bubble growing on a heated surface
  Summary

  Thermocapillary driven flow around bubbles growing on a heated surface is being investigated. In particular, this investigation targets the effect of the surface tension driven flow on the heat transfer enhancement in the vicinity of the bubble. The influence of gravity on the heat transfer is also being investigated.
  Funding Agency

  IRCSET
  Date From

  Oct. 2006
  Date To

  Oct. 2009
• Title

  The Eternal Candle
  Summary

  This project involves the development of a novel renewable energy technology to provide affordable off-grid lighting for the developing world.
  Funding Agency

  Enterprise Ireland
  Date From

  Oct 2009
• Title

  The Development of Novel Thermal Interface Materials
  Summary

  Novel thermal interface materials (TIMs) are being developed to reduce the contact resistance between electronic components and the first level of thermal hardware
  Funding Agency

  Industry
  Date From

  Oct. 2006
  Date To

  Oct. 2009
• Title

  Reliability of Thermal Interface Materials
  Summary

  Accelerated stress test facilities and associated tests are being performed on thermal greases.
  Funding Agency

  Siemens Wind Power
  Date From

  Feb 2012
  Date To

  Jan 2013
• Title

  The Electric Cook Stove Project
  Summary
  Funding Agency

  Electricity Supply Board of Ireland: Electric Aid
  Date From

  01/09/2010
• Title

  Solid State Thermal Interface Material
  Summary

  This project involves the development of a new thermal interface material (TIM) technology for mitigating contact thermal resistance in electronic hardware.
  Funding Agency

  Science Foundation Ireland
  Date From

  2014
  Date To

  2015
• Title

  Environmentally Green Medium Temperature Heat Pipes
  Summary

  Environmentally sound non-toxic heat pipes that operate in the temperature range of 200 degC to 500 degC are not commercially available. An experimental programme has been initiated whereby working fluid-wick-container combinations are being explored and heat pipes are being manufactured and tested for use in this temperature range.
  Funding Agency

  Enterprise Ireland
  Date From

  Oct. 2005
  Date To

  Oct. 2006
• Title

  Liquid Microjet Array Heat Transfer
  Summary

  A fundamental study of the heat transfer to an impinging liquid microjet array is being performed with direct application to photonics thermal management.
  Funding Agency

  SFI
  Date From

  May 2005
  Date To

  May 2009
• Title

  TaylorMed: Electrospray
  Summary

  This project is developing mediated delivery of biological molecules into mammalian cells
  Funding Agency

  FP7
  Date From

  Aug 2010
  Date To

  July 2014
• Title

  Scalability Assessment of TEG-Stoves in Rural Off-The-Grid Malawi
  Summary

  The project involves the development of off grid electrical generating devices for remote regions of the developing world.
  Funding Agency

  Irish Aid
  Date From

  2013
  Date To

  2015

Electrical engineering, Communications engineering,

• CONNECT Impact Award 2025
• Trinity College Dublin Innovation Awards: Inventor of the Year 2019
• TIME Magazine: The Best Inventions of 2025 2025
• Knowledge Transfer Ireland (KTI) Impact Award for Collaborative Research 2017
• Honorary Masters of Arts, Trinity College Dublin 2009
• Trinity College Dublin Innovation Awards: Campus Companies 2019
• Fast Company World Changing Ideas Awards 2025 - Winner, Nexalus Liquid Cooling Technology 2025
• Elected Fellow of Trinity College Dublin 2014
• Elsevier/Stanford World's Top 2% Scientists - Career-long Impact (2020-2025) 2020

• European Space Agency (ESA) Topical Team on Advanced Thermal Management in Space and Planetary Exploration (ATeMS) - Member Present
• European Two-Phase Flow Group (ETPFG) - Member Present
• European Space Agency (ESA) International Topical Team on Two-Phase Heat Transfer - Member 2024
• Data Centre Alliance (DCA) - Thermal Management Special Interest Group (SIG) - Member Present

• Member: European Space Agency (ESA) ARLES Scientific Team, 2020-Present. Member of the international scientific team supporting ESA research activities in microgravity two-phase flow and heat transfer. 2020-Present
• Member: European COST Action TU0802 - Next Generation Cost Effective Phase Change Materials for Increased Energy Efficiency in Renewable Energy Systems in Buildings, 2009-2013. Participated in this European research network focused on phase-change materials and thermal-energy storage for improved building energy efficiency. 2009-2013
• Board Member: Research, Development and Innovation Board, Grant Engineering, 2025-Present. Appointed external member of the RD&I Board of this Irish SME, providing independent technical and research expertise to support the review and strategic direction of R&D activities, with particular focus on the development of next-generation domestic heat pump technologies. 2025-Present
• Scientific Committee Member: International Conference on Experimental and Numerical Flow and Heat Transfer (ENFHT'16), 2015. Served on the Scientific Committee of this international conference focused on experimental and computational research in fluid flow and heat transfer. 2015
• Scientific Committee Member: EUROTHERM Seminar 109 - Numerical Heat Transfer 2015, Warsaw, Poland. Served on the Scientific Committee of this international specialist seminar on numerical heat transfer. 2015
• Editorial Advisory Board Member: Experimental Thermal and Fluid Science, Elsevier, 2024-Present. Member of the journal's Editorial Advisory Board following eight years of service as an Editor (2016-2024). 2024-Present
• Member, Board of Directors: Sonairte National Ecology Centre, Co. Meath, Ireland, 2013-2016. Served on the Board of Directors of this environmental and sustainability organisation, contributing to organisational governance and oversight of its activities in environmental education and sustainable living. 2013-2016
• Scientific Committee Member: International Conference on Energy Research and Technology (ICERT'17), 2017. Served on the Scientific Committee of this international conference covering energy research, technology and related engineering developments. 2017
• Editor: Experimental Thermal and Fluid Science, Elsevier, 2016-2024. Appointed Editor with responsibility for independent assessment of submitted manuscripts, selection of expert peer reviewers, evaluation of reviews and editorial decisions on publication. Served in this substantive editorial role for eight years. 2016-2024
• Scientific Committee Member: EUROTHERM Seminar 102 - Thermal Management of Electronic Systems, 2014. Served on the Scientific Committee of this international specialist seminar focused on thermal management of electronic systems. 2014
• Earlier international professional service (pre-2014). Advisory Committee Member, Sustainable Energy in Buildings Conference (2013); International Conference on Sustainable Energy & Environmental Protection (2009-2010); and 26th International Manufacturing Conference (2009): Energy Efficient & Low Carbon Manufacturing (2009). 2009-2013
• Expert Peer Reviewer for approximately 50 international scientific and engineering journals, spanning fundamental science, fluid mechanics, heat and mass transfer, multiphase flow, energy and sustainability, chemical/process engineering, electronics thermal management and the built environment. Representative journals include Nature, Renewable & Sustainable Energy Reviews, Applied Energy, Building and Environment, International Journal of Heat and Mass Transfer, Physics of Fluids, International Journal of Multiphase Flow, AIChE Journal, and IEEE Transactions on Components and Packaging Technologies. 2007-Present
• Expert Reviewer: National and international research funding and academic assessment bodies, 2015-2021. Expert reviewer for Enterprise Ireland; Natural Sciences and Engineering Research Council (Canada); Agence Nationale de la Recherche (France); Technology Foundation STW/Dutch Research Council (Netherlands); National Science Centre (Poland); Swiss National Science Foundation; European Space Agency/ESTEC; and University of South Australia. 2015-2021
• Member: European Space Agency (ESA) Two-Phase Heat Transfer International Topical Team, 2013-2024; Advanced Thermal Management in Space and Planetary Exploration (ATeMS), 2026-Present. Appointed member of the ESA international expert team contributing to the definition and design of two-phase heat transfer experiments for space applications, including experiments for the International Space Station. Membership also led to participation in ESA/Novespace parabolic-flight experimental campaigns. Following conclusion of the Two-Phase Heat Transfer Topical Team in 2024, appointed to its newly established successor, ATeMS. 2013-2026
• Guest Editor: International Journal of Heat and Mass Transfer, Special Issue on Boiling & Condensation, Elsevier, 2023-2025. Invited to serve as Guest Editor for this specialist issue, with responsibility for overseeing peer review and editorial assessment of submitted papers. 2023-2025
• Editorial Board Member: International Journal of Thermofluids, Elsevier, 2019-Present. Member of the Editorial Board of this international journal covering thermal and fluid sciences. 2019-Present
• External Examiner/Assessor for Doctoral Degrees, 2009-2026. Twenty external doctoral examination and assessment appointments at universities across eight countries, including KU Leuven (Belgium), University of Pisa (Italy), INSA Lyon and University of Toulouse (France), McMaster University (Canada), University of Brighton (UK), Thapar University (India), Queen's University Belfast and University of Limerick. Fourteen appointments have been undertaken since 2014, with repeated appointments by several institutions. 2009-2026
• Member: European Two-Phase Flow Group (ETPFG), 2012-Present. Invited member of this international, invitation-only specialist group bringing together researchers in two-phase flow and heat transfer. 2012-Present