Skip to main content

Trinity College Dublin, The University of Dublin

Trinity Menu Trinity Search



Dr. Shuo Yin
Assistant Professor, Mechanical, Manuf & Biomedical Eng

Biography

Dr. Shuo Yin was appointed Assistant Professor and Principal Investigator within the Department of Mechanical, Manufacturing and Biomedical Engineering in January 2019. His expertise is mainly on additive manufacturing processes including cold spraying, selective laser melting, digital light processing, and direct-ink writing. His research mainly focuses on equipment design and manufacturing, microstructure characterization and analysis, process in-situ visualization, numerical modeling (CFD and FEA), mechanical and biomedical properties. He received B.Eng and Ph.D from Dalian University of Technology in July 2007 and January 2013. From 2013 to 2015, he worked as a postdoctoral researcher at the University of Technology of Belfort-Montebiard in France and Wageningen University in the Netherland. He then moved to Dublin and was appointed research fellow in Trinity College Dublin.

Dr. Yin has secured over EUR 3 million research funding from a number of funding bodies as PI or Co-PI, including the European Innovation Council (EIC), Science Foundation Ireland (SFI), Irish Research Council (IRC), Enterprise Ireland (EI), IntertradeIreland, and industrial partners. He is the awardee of IRC Government of Ireland Postdoctoral Research Fellowship, and SFI Frontiers for the future project. He has authored or co-authored over 100 papers in peer-reviewed journals with a total citation of over 3000 times. In 2021, he published a monograph entitled "Cold Spray Additive Manufacturing: from fundamentals to applications". He served as guest editor for the Journal of Thermal Spray Technology in 2019.

Dr. Yin's research team has 2 postdoc, 7 PhD students, 3 visiting PhD students and 4 master students. He is lecturing three undergraduate modules: 4B6 Manufacturing Systems and Project Management, 3B3 Mechanics of Solids and 2MEMS10 Manufacturing Engineering Design.

Publications and Further Research Outputs

Peer-Reviewed Publications

Weihao Yuan, Hui Chen, Shuai Li, Yuhua Heng, Shuo Yin, Qingsong Wei, Understanding of adopting flat-top laser in laser powder bed fusion processed Inconel 718 alloy: Simulation of single-track scanning and experiment, Journal of Materials Research and Technology, 16, 2022, p1388 - 1401 Journal Article, 2022

Qingge Xie#, Zhiran Yan#, Dunji Yu, Ke An, Xingchen Yan, Shuo Yin, Bobby Gillham, Xiaolong Wu, Ping Yang, Zhengzhi Zhao, Yandong Wang, Crystallographic orientation and spatially resolved damage for polycrystalline deformation of a high manganese steel, Acta Materialia, 2022 Journal Article, 2022

D. Guo, M. Kazasidis, A. Hawkins, N. Fan, Z. Leclerc, D. MacDonald, A. Nastic, R. Nikbakht, R. OrtizFernandez, S. Rahmati, M. Razavipour, P. Richer, S. Yin, R. Lupoi, B. Jodoin, Cold spray: over 30 years of development towards a hot future, Journal of Thermal Spray Technology, 2022 Journal Article, 2022

Xiao Zhang, Nannan Zhang, Bowei Xing, Shuo Yin, An assessment of the high temperature oxidation resistance of selected thermal sprayed high entropy alloy coatings, Journal of Thermal Spray Technology, 2022 Journal Article, 2022

O. Kovarik, J. Cizek, S. Yin, R. Lupoi, M. Janovska, J. Cech, J. Capek, J. Siegl, T. Chraska, Mechanical and fatigue properties of diamond-reinforced Cu and Al metal matrix composites prepared by cold spray, Journal of Thermal Spray Technology, 2022 Journal Article, 2022

Pengfei Yu, Ningsong Fan, Yongyun Zhang, Zhijun Wang, Wenya Lii, Rocco Lupoi, Shuo Yin, Microstructure evolution and composition redistribution of FeCoNiCrMn high entropy alloy under extreme plastic deformation, Materials Research Letters, 2022 Journal Article, 2022 DOI

Shuo Yin, Mostafa Hassani, Qingge Xie, Rocco Lupoi, Unravelling the deposition mechanism of brittle particles in metal matrix composites fabricated via cold spray additive manufacturing, Scripta Materialia, 194C, 2021, p113614 Journal Article, 2021

Chao Gu, Lu Bai, Fei Cheng and Shuo Yin, A Circularly Polarized Antenna in D-Band, IEEE Texas Symposium on Wireless and Microwave Circuits and Systems (WMCS) , U.S., 2021 Conference Paper, 2021

Yaxin Xu, Wenya Li, Longzhen Qu, Xiawei Yang, Bo Song, Rocco Lupoi, Shuo Yin, Solid-state Cold Spraying of FeCoCrNiMn High-entropy Alloy: An Insight into Microstructure Evolution and Oxidation Behavior at 700-900 °C, Journal of Materials Science and Technology, 68, 2021, p172 - 183 Journal Article, 2021

Shuo Yin, Rocco Lupoi, Cold Spray Additive Manufacturing: From fundamentals to applications, Springer, 2021 Book, 2021

Yongming Zou, Zhaoguo Qiu, Zhigang Zheng, Gang Wang, Xingchen Yan, Shuo Yin, Min Liu, Dechang Zeng, Ex-situ additively manufactured FeCrMoCB/Cu bulk metallic glass composite with well wear resistance, Tribology International, 162, 2021, p107112 Journal Article, 2021

Xinliang Xie, Shuo Yin, Rija-nirina Raoelison, Chaoyue Chen, Christophe Verdy, Wenya Li, Gang Ji, Zhongming Ren, Hanlin Liao, Al matrix composites fabricated by solid-state cold spray deposition: a critical review, Journal of Materials Science and Technology, 86, 2021, p20 - 55 Journal Article, 2021

Chi-Ho Ng, Shuo Yin, Rocco Lupoi, John Nicholls, Correlation between Flattening Ratio and Wear Performance of Cold Sprayed Metal Matrix Composite Coatings, Materials Letters, 283, 2021, p128773 Journal Article, 2021

Mansur Ahmed, Saiful Islam, Shuo Yin, Richard Coull and Dariusz Rozumek, Fatigue Crack Growth Behaviour and Role of Roughness-Induced Crack Closure in CP Ti: Stress Amplitude Dependence, Metals, 11, (10), 2021, p1656 Journal Article, 2021

Laser Additive Manufacturing of Single-Crystal Superalloy Component: From Solidification Mechanism to Grain Structure Control in, editor(s)Pasquale Cavaliere , Laser Cladding of Metals, Springer, 2021, pp137 - 159, [Chaoyue Chen, Jiang Wang, Hanlin Liao, Zhongming Ren, Shuo Yin] Book Chapter, 2021

A. Silvello, P. Cavaliere, S. Yin, R. Lupoi, I. Garcia Cano, S. Dosta, Microstructural, Mechanical and Wear Behaviour of HVOF and Cold Sprayed High Entropy Alloys (HEAs) coatings, Journal of Thermal Spray Technology, 2021 Journal Article, 2021

Marios Kazasidis, Elisa Verna, Shuo Yin, Rocco Lupoi, The effect of heat treatment and impact angle on the erosion behaviour of nickel-tungsten carbide cold spray coating using Response Surface Methodology, Emergent Materials, 2021, p1 - 14 Journal Article, 2021 DOI

Applications of Laser in Cold Spray in, editor(s)Pasquale Cavaliere , Laser Cladding of Metals, Springer, 2021, pp395 - 427, [Ningsong Fan, Xinliang Xie, Chunjie Huang, Rocco Lupoi, Shuo Yin] Book Chapter, 2021

Bingqian Jin, Nannan Zhang, Shuo Yin, Strengthening behavior of AlCoCrFeNi(TiN)x high-entropy alloy coatings fabricated by plasma spraying and laser remelting , Journal of Materials Science and Technology, 2021 Journal Article, 2021

H.Z. Lu , H.W. Ma , W.S. Cai , X. Luo , Z. Wang , C.H. Song , S. Yin , C. Yang, Stable tensile recovery strain induced by a Ni4Ti3 nanoprecipitate in a Ni50.4Ti49.6 shape memory alloy fabricated via selective laser melting, Acta Materialia, 219, (15), 2021, p117261 Journal Article, 2021

Chao Zhang, Jinyong Xu, Guodong Sun, Xinlong Wei, Jinkun Xiao, Ga Zhang, Shuo Yin, Wear behaviors of 5 wt. % SiO2-Ni60 coatings deposited by atmospheric plasma spraying under dry and water-lubrication sliding conditions, Wear, 470-471, 2021, p203621 Journal Article, 2021

Qiang Wang, Peng Han, Shuo Yin, Wen-Juan Niu, Le Zhai, Xu Li, Xuan Mao and Yu Han, Current Research Status on Cold Sprayed Amorphous Alloy Coatings: A Review, Coatings, 11, 2021, p206 Journal Article, 2021

Shuo Yin*, Jan Cizek, Jan Cupera, Mostafa Hassani, Xiaotao Luo, Richard Jenkins, Yingchun Xie, Wenya Li, Rocco Lupoi, Formation conditions of vortex-like intermixing interfaces in cold spray, Materials & Design, 200, 2021, p109444 Journal Article, 2021

Jinguo Ge, Ningsong Fan, Yuhong Long, Jian Lin, Yongping Lei, Shuo Yin, Investigation on H13 buildups produced with wire arc additive manufacturing: deposition strategies-induced microstructural evolution and mechanical performances, Journal of Alloys and Compounds, 2021 Journal Article, 2021

H.Z. Lu, H.W. Ma, X. Luo, Y. Wang, J. Wang, R. Lupoi, S. Yin, C. Yang, Microstructure, shape memory properties, and in vitro biocompatibility of porous NiTi scaffolds fabricated via selective laser melting, Journal of Materials Research and Technology, 15, 2021, p6797 - 6812 Journal Article, 2021

Jinguo Ge, Xingchen Yan, Yongping Lei, Mansur Ahmed, Peter O'Reilly, Chao Zhang, Rocco Lupoi, Shuo Yin, A detailed analysis on the microstructure and compressive properties of selective laser melted Ti6Al4V lattice structures, Materials & Design, 198, 2021, p109292 Journal Article, 2021

Wenya Li, Congcong Cao, Shuo Yin, Solid-state cold spraying of Ti and its alloys: a literature review, Progress in Materials Science, 2020, p100633 Journal Article, 2020

Shuo Yin*, Jan Cizek, Chaoyue Chen, Richard Jenkins, Garret O' Donnell, Rocco Lupoi, Metallurgical bonding between metal matrix and core-shelled reinforcements in cold sprayed composite coating, Scripta Materialia, 177, 2020, p49 - 53 Journal Article, 2020

Yi Liu, Wenjia Hou, Rocco Lupoi, Shuo Yin, Jing Huang, Hua Li, Microscopic visualization of cell - cold sprayed bio-coating interfaces: an intermediate layer formed during the culturing mediates the behaviors of the cells, Applied Surface Science, 529, 2020, p147132 Journal Article, 2020

Xinliang Xie, Yu Ma, Chaoyue Chen, Gang Ji, Christophe Verdy, Hongjian, Wu, Zhe Chen, Sheng Yuan, Bernard Normand, Shuo Yin, Hanlin Liao, Cold spray additive manufacturing of metal matrix composites (MMCs) using a novel nano-TiB2-reinforced 7075Al powder, Journal of Alloys and Compounds, 819, 2020, p152962 Journal Article, 2020

Xinliang Xie, Chaoyue Chen, Zhe Chen, Wen Wang, Shuo Yin, Gang Ji, Hanlin Liao, Achieving simultaneously improved tensile strength and ductility of a nano-TiB2/ AlSi10Mg composite produced by cold spray additive manufacturing, Composites Part B: Engineering, 202, 2020, p108404 Journal Article, 2020

Ziyu Chen, Xingchen Yan, Shuo Yin, Liangliang Liu, Xin Liu, Guorui Zhao, Wenyou Ma,Weizhong Qi, Zhongming Ren, Hanlin Liao, Min Liu, Daozhang Cai, Hang Fang , Influence of the pore size and porosity of selective laser melted Ti6Al4V ELI porous scaffold on 2 cell proliferation, osteogenesis and bone ingrowth, Materials Science and Engineering C, 106, 2020, p110289 Journal Article, 2020

Xingchen Yan, Chaoyue Chen, Cheng Chang, Dongdong Dong, Ruixin Zhao, Richard Jenkins, Jiang Wang, Zhongming Ren, Min Liu, Hanlin Liao, Rocco Lupoi, Shuo Yin, Study of the microstructure and mechanical performance of C-X stainless steel processed by selective laser melting (SLM), Materials Science and Engineering A, 781, 2020, p139227 Journal Article, 2020

Wen Sun, Adrian Wei-Yee Tan, Kaiqiang Wu, Shuo Yin, Xiawei Yang, Iulian Marinescu, Erjia Liu, Post-process Treatments on Supersonic Cold Sprayed Coatings: A Review, Coatings, 10, (2), 2020, p123 Journal Article, 2020

Chao Zhang, Bo Huang, Jinyong Xu, Wenjian Cao, Guodong Sun, Jinkun Xiao, Shuo Yin, Effect of Mo on tribological behaviors of atmospheric plasma sprayed Al2O3-13%TiO2/Mo coatings under boundary lubrication condition, Ceramics International, 46, (10), 2020, p15066 - 05075 Journal Article, 2020

Mansur Ahmed, Md Saiful Islam, Shuo Yin, Rocco Lupoi, Minimum Fatigue Striation Spacing and its Stress Amplitude Dependence in a Commercially Pure Titanium, Fatigue and Fracture of Engineering Materials and Structures, 43, 2020, p628 - 634 Journal Article, 2020

Marios Kazasidis, Shuo Yin, Jonathan Cassidy, Tatjana Volkov-Husoviæ, Milica Vlahoviæ, Sanja Martinoviæ, Kyriakopoulou Elena, Rocco Lupoi, Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray, Surface and Coatings Technology, 328, 2020, p125195 Journal Article, 2020

Chi-Ho Ng, Shuo Yin, Rocco Lupoi, John Nicholls, Mechanical Reliability Modification of Metal Matrix Composite Coatings by Adding Al Particles via Cold Spray Technology , Surfaces and Interfaces, 2020, p100515 Journal Article, 2020

Xingchen Yan, Chunbao Shi, Taikai Liu, Yun Ye , Chang Cheng, Wenyou Ma, Chunming Deng, Shuo Yin, Hanlin Liao, Min Liu, Effect of heat treatment on the corrosion resistance behavior of selective laser melted Ti6Al4V ELI, Surface and Coatings Technology, 396, 2020, p125955 Journal Article, 2020

Ningsong Fan, Jan Cizek, Chunjie Huang, Xinliang Xie, Zdenek Chlup, Richard Jenkins, Rocco Lupoi, Shuo Yin, A new strategy for strengthening additively manufactured cold spray deposits through in-process densification, Additive Manufacturing, 36, 2020, p101626 Journal Article, 2020

Xingchen Yan, Cheng Chang*, Dongdong Dong, Shuohong Gao, Wenyou Ma, Min Liu, Hanlin Liao, Shuo Yin*, Microstructure and mechanical properties of pure copper manufactured by selective laser melting, Materials Science and Engineering A, 789, 2020, p139615 Journal Article, 2020

Jinguo Ge, Jian Huang, Yongping Lei, Peter O`Reilly, Mansur Ahmed, Chao Zhang, Xingchen Yan, Shuo Yin, Microstructural features and compressive properties of SLM Ti6Al4V lattice structures, Surface and Coatings Technology, 403, 2020, p126419 Journal Article, 2020

Kuan Chen, Yi Liu, Yaoyao Fu, Jing Huang, Xiaohua Feng, Jiang Wang, Mengjiao Zhai, Rocco Lupoi, Shuo Yin, Hua Li, Loading of Zn/ZnO particles in the precursor feedstock affects the characteristics of liquid plasma sprayed nano-ZnO coatings for photocatalytic applications, Nanotechnology, 31, 2020, p185301 Journal Article, 2020 DOI

Chaoyue Chen, Yingchun Xie, Xingchen Yan, Mansur Ahmed, Min Liu, Rocco Lupoi, Jiang Wang, Zhongming Ren, Hanlin Liao, Shuo Yin, Tribological properties of Al/diamond composites produced by cold spray additive manufacturing, Additive Manufacturing, 36, 2020, p101434 Journal Article, 2020 DOI

Rocco Lupoi, Morten Meyer, Shuo Yin, The role of particles flow characteristics in the performance of cold spray nozzles, CIRP Annals, 69, 2020, p189 - 192 Journal Article, 2020

Richard Jenkins , Barry Aldwell, Shuo Yin, Subhash Chandra, Gary Morgan, Rocco Lupoi, Solid state additive manufacture of highly-reflective Al coatings using cold spray Richard, Optics and Laser Technology, 115, 2019, p251 - 256 Journal Article, 2019

Richard Jenkins, Barry Aldwell, Shuo Yin, Morten Meyer, Anthony Robinson, Rocco Lupoi, Energy Efficiency of a Quartz Tungsten Halogen Lamp: Experimental and Numerical Approach, Thermal Science and Engineering Progress, 13, 2019, p100385 Journal Article, 2019

Xingchen Yan, Rocco Lupoi, Hongjian Wu, Wenyou Ma, Min Liu, Garrett O'Donnell, Shuo Yin*, Effect of hot isostatic pressing (HIP) treatment on the compressive properties of Ti6Al4V lattice structure fabricated by selective laser melting, Materials Letters, 255, 2019, p1 - 4 Journal Article, 2019

Chaoyue Chen, Yingchun Xie, Xingchen Yan, Shuo Yin, Renzhong Huang, Ruixin Zhao, Jiang Wang, Zhongming Ren, Min Liu, Hanlin Liao, Effect of hot isostatic pressing (HIP) on microstructure and mechanical properties of Ti6Al4V alloy fabricated by cold spray additive manufacturing, Additive Manufacturing, 27, 2019, p595-605 Journal Article, 2019

Xingchen Yan, Shuo Yin*, Chaoyue Chen, Richard Jenkins, Rocco Lupoi, Rodolphe Bolot, Wenyou Ma, Min Kuang, Hanlin Liao, Jian Lu*, Min Liu* , Fatigue strength improvement of selective laser melted Ti6Al4V using ultrasonic surface mechanical attrition, Materials Research Letters, 7, (8), 2019, p327 - 333 Journal Article, 2019

Shuo Yin, Jan Cizek, Xingchen Yan, Rocco Lupoi, Annealing strategies for enhancing mechanical properties of additively manufactured 316L stainless steel deposited by cold spray, Surface and Coatings Technology, 370, 2019, p353 - 361 Journal Article, 2019

Xingchen Yan, Qing Li, Shuo Yin, Ziyu Chen, Richard Jenkins, Chaoyue Chen, Jiang Wang, Wenyou Ma, Rodolphe Bolot, Rocco Lupoi, Zhongming Ren, Hanlin Liao, Min Liu, Mechanical and in vitro study of an isotropic Ti6Al4V lattice structure fabricated using selective laser melting, Journal of Alloys and Compounds, 782, 2019, p209 - 223 Journal Article, 2019

Shuo Yin, Wenya Li, Bo Song, Xingchen Yan, Min Kuang, Yaxin Xu, Kui Wen, Rocco Lupoi, Deposition of FeCoNiCrMn high entropy alloy (HEA) coating via cold spraying, Journal of Materials Science & Technology, 35, (6), 2019, p1003 - 1007 Journal Article, 2019

Michele Calandri, Shuo Yin, Barry Aldwell, Flaviana Calignano, Rocco Lupoi and Daniele Ugues*, Texture and Microstructural Features at Different Length Scales in Inconel 718 Produced by Selective Laser Melting, Materials, 12, 2019, p1293 Journal Article, 2019

Nanostructured Metal Coatings via Cold Spray in, editor(s)Guanjun Yang, Xinkun Suo , Advanced Nanomaterials and Coatings by Thermal Spray, Elsevier, 2019, [Shuo Yin, Chaoyue Chen, Rocco Lupoi] Book Chapter, 2019

Shuo Yin, Xingchen Yan, Richard Jenkins, Chaoyue Chen, Emmanouil-Marios Kazasidis, Min Liu, Min Kuang, Rocco Lupoi, Hybrid additive manufacture of 316L stainless steel with cold spray and selective laser melting: microstructure and mechanical properties, Journal of Materials Processing Technology, 273, 2019, p116248 Journal Article, 2019

Richard Jenkins, Barry Aldwell, Shuo Yin, Rocco Lupoi, Modelling and experimental testing of a novel focused infrared heater for use with cold spray, Procedia CIRP, 2018, p97 - 102 Journal Article, 2018 DOI

Xingchen Yan, Shuo Yin, Chaoyue Chen, Chunjie Huang, Rodolphe Bolot, Min Kuang, Wenyou Ma, Rocco Lupoi, Christian Coddet, Hanlin Liao, Min Liu, Effect of heat treatment on the phase transformation and mechanical properties of Ti6Al4V fabricated by selective laser melting, Journal of Alloys and Compounds, 764, 2018, p1056 - 1071 Journal Article, 2018

Wenya Li, Kang Yang, Shuo Yin, Xiawei Yang, Yaxin Xu, Rocco Lupoi, Solid-state additive manufacturing and repairing by cold spraying: A review, Journal of Materials Science & Technology, 34, (3), 2018, p440 - 457 Journal Article, 2018

Shuo Yin, Richard Jenkins, Xingchen Yan, Rocco Lupoi, Microstructure and mechanical anisotropy of additively manufactured cold spray copper deposits, Materials Science & Engineering A, 734, 2018, p67 - 76 Journal Article, 2018 DOI

Shuo Yin, Xingchen Yan, Chaoyue Chen, Min Liu and Rocco Lupoi, Hybrid additive manufacturing of Al-Ti6Al4V functionally graded materials with selective laser melting and cold spraying, Journal of Materials Processing Technology, 255, 2018, p650 - 655 Journal Article, 2018

Wenya Li, Hamid Assadi, Frank Gaertner, and Shuo Yin, A Review of Advanced Composite and Nanostructured Coatings by Solid-State Cold Spraying Process, Critical Reviews in Solid State and Materials Sciences, 44, (2), 2018, p109 - 156 Journal Article, 2018

Yingchun Xie, Shuo Yin , Jan Cizek, Jan Cupera, Enyu Guo, Rocco Lupoi, Formation mechanism and microstructure characterization of nickel-aluminum intertwining interface in cold spray, Surface and Coating Technology, 337, 2018, p447 - 452 Journal Article, 2018 DOI

Shuo Yin, Pasquale Cavaliere, Barry Aldwell, Richard Jenkins, Hanlin Liao, Wenya Li, Rocco Lupoi, Cold spray additive manufacturing and repair: Fundamentals and applications, Additive Manufacturing, 21, 2018, p628 - 650 Journal Article, 2018

C. Stenson, K. A. McDonnell, S. Yin, B. Aldwell, M. Meyer, D. P. Dowling & R. Lupoi, Cold spray deposition to prevent fouling of polymer surfaces, Surface Engineering, 34, (3), 2018, p193 - 204 Journal Article, 2018

Xinkun Suo, Shuo Yin, Hua Li, Rocco Lupoi, Numerical and Experimental Investigation on Bonding Behavior of Cold Sprayed Porous WC-17Co Particles onto Different Substrates, Coatings, 8, (10), 2018, p9 Journal Article, 2018 DOI

Shuo Yin, Chaoyue Chen, Xingchen Yan, Xiaohua Feng, Richard Jenkins, Peter O'Reilly, Min Liu, Hua Li, Rocco Lupoi, The influence of aging temperature and aging time on the mechanical and tribological properties of selective laser melted maraging 18Ni-300 steel, Additive Manufacturing, 22, 2018, p592 - 600 Journal Article, 2018

Richard Jenkins, Shuo Yin, Barry Aldwell, Morten Meyer, Rocco Lupoi, New insights into the in-process densification mechanism of cold spray Al coatings: low deposition efficiency induced densification, Journal of Materials Science and Technology, 35, 2018, p427 - 431 Journal Article, 2018

Shuo Yin, Yingchun Xie, Jan Cizek, Emmanuel J. Ekoi, Tanvir Hussain, Denis P. Dowling, Rocco Lupoi, Advanced diamond-reinforced metal matrix composites via cold spray: Properties and deposition mechanism, Composites Part B:Engineering, 113, 2017, p44 - 54 Journal Article, 2017

Shuo Yin, Zhao Zhang, Emmanuel J. Ekoi, Jing Jing Wang, Denis P. Dowling, Valeria Nicolosi, Rocco Lupoi, Novel cold spray for fabricating graphene-reinforced metal matrix composites, Materials Letters, 196, 2017, p172 - 175 Journal Article, 2017

Cold Spray Additive Manufacture and Component Restoration in, editor(s)Pasquale Cavaliere , Cold-Spray Coatings: Recent Trends and Future perspectives, Springer International Publishing, 2017, [Shuo Yin, Barry Aldwell, Rocco Lupoi] Book Chapter, 2017

Chaoyue Chen, Sébastien Gojon, Yingchun, Xie, Shuo Yin, Christophe Verdy, Zhongming Ren, Hanlin Liao, Sihao Deng, A novel spiral trajectory for damage component recovery with cold spray, Surfance & Coatings Technology, 309, 2017, p719 - 728 Journal Article, 2017

Morten Meyer, Shuo Yin, Rocco Lupoi, Particle In-Flight Velocity and Dispersion Measurements at Increasing Particle Feed Rates in Cold Spray, Journal of Thermal Spray Technology, 26, 2017, p60 - 70 Journal Article, 2017

Barry Aldwell, Daniel Trimble, Shuo Yin and Rocco Lupoi, Enabling diamond deposition with Cold Spray through the coated particle method, Materials Science Forum, 879, 2017, p1194 - 1199 Journal Article, 2017 DOI

Shuo Yin, Emmanuel J. Ekoi, Thomas L. Luption, Denis P. Dowling, Rocco Lupoi, Cold spraying of WC-Co-Ni coatings using porous WC-17Co powders: Formation mechanism, microstructure characterization and tribological performance, Materials & Design, 126, 2017, p305 - 313 Journal Article, 2017

Wenya Li, Kang Yang, Shuo Yin, Xueping Guo, Numerical Analysis of Cold Spray Particles Impacting Behavior by the Eulerian Method: A Review, Journal of Thermal Spray Technology, 25, 2016, p1441 - 1460 Journal Article, 2016

Barry Aldwell, Shuo Yin, Kevin A. McDonnell, Daniel Trimble,Tanvir Hussain,Rocco Lupoi, A novel method formetal-diamond composite coating deposition with cold spray and formation mechanism, Scripta Materialia, 115, 2016, p10 - 13 Journal Article, 2016

Shuo Yin, Morten Meyer, Wenya Li, Hanlin Liao, and Rocco Lupoi, Gas Flow, Particle Acceleration, and Heat Transfer in Cold Spray: A review, Journal of Thermal Spray Technology, 25, 2016, p874 - 896 Journal Article, 2016

Peng-jiang He, Shuo Yin, Chen Song, Frederic Lapostolle, and Han-lin Liao, Characterization of Yttria-Stabilized Zirconia Coatings Deposited by Low-Pressure Plasma Spraying, Journal of Thermal Spray Technology, 25, 2016, p558 - 566 Journal Article, 2016

Shuo Yin, Bert van't Ooster, Nico WM Ogink, Peter WG Groot Koerkamp, Assessment of porous media instead of slatted floor for modelling the airflow and ammonia emission in the pit headspace, Computers and Electronics in Agriculture, 123, 2016, p163 - 175 Journal Article, 2016

Morten Meyer, Shuo Yin, K.A. McDonnell, O. Stier, Rocco Lupoi, Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions, Surfance & Coatings Technology, 304, 2016, p237 - 245 Journal Article, 2016

Yingchun Xie, Shuo Yin*, Chaoyue Chen, Marie-Pierre Planche, Hanlin Liao,Rocco Lupoi, New insights into the coating/substrate interfacial bonding mechanism in cold spray, Scripta Materialia, 125, 2016, p1 - 4 Journal Article, 2016

Chaoyue Chen, Yingchun Xie, Shuo Yin, Marie-Pierre Planche, Sihao Deng, Rocco Lupoi, Hanlin Liao, Evaluation of the interfacial bonding between particles and substrate in angular cold spray, Materials Letters, 173, 2016, p76 - 79 Journal Article, 2016

Shuo Yin, Xinkun Suo, Yingchun Xie, Wenya Li, Rocco Lupoi, Hanlin Liao, Effect of substrate temperature on interfacial bonding for cold spray of Ni onto Cu, Journal of Materials Science, 50, 2015, p7448 - 7457 Journal Article, 2015

Shuo Yin, Xinkun Suo, Zhiwei Guo, Hanlin Liao, Xiaofang Wang, Deposition features of cold sprayed copper particles on preheated substrate, Surfance & Coatings Technology, 268, 2015, p252 - 256 Journal Article, 2015

Zhiwei Guo, Shuo Yin*, Hanlin Liao, Sai Gu, Three-dimensional simulation of an argon-hydrogen DC non-transferred arc plasma torch, International Journal of Heat and Mass Transfer, 80, 2015, p644 - 652 Journal Article, 2015

Qi Liu, Yoann Danlos, Bo Song, Baicheng Zhang, Shuo Yin, Hanlin Liao, Effect of high-temperature preheating on the selective laser melting of yttria-stabilized zirconia ceramic, Journal of Materials Processing Technology, 222, 2015, p61 - 74 Journal Article, 2015

Shuo Yin, Yingchun Xie, Xinkun Suo, Hanlin Liao, Xiaofang Wang, Interfacial bonding features of Ni coating on Al substrate with different surface pretreatments in cold spray, Materials Letters, 138, 2015, p143 - 147 Journal Article, 2015

Xudong Wang, Bo Zhang, Jinsheng Lv, and Shuo Yin, Investigation on the Clogging Behavior and Additional Wall Cooling for the Axial-Injection Cold Spray Nozzle, Journal of Thermal Spray Technology, 24, 2015, p696 - 701 Journal Article, 2015

Xinkun Suo, Shuo Yin, Marie-Pierre Planche, Taikai Liu, Hanlin Liao, Strong effect of carrier gas species on particle velocity during cold spray processes, Surfance & Coatings Technology, 268, 2015, p90 - 93 Journal Article, 2015

Zhiwei Guo, Shuo Yin, Zhongdong Qian, Hanlin Liao, Sai Gu, Effect of the deviation of the current density profile center on the three-dimensional non-transferred arc plasma torch, Computers & Fluids, 117, 2015, p163 - 171 Journal Article, 2015

Shuo Yin, Hanlin Liao, Xiaofang Wang, Euler based finite element analysis on high velocity impact behaviour in cold spraying, Surface Engineering, 30, 2014, p309 - 315 Journal Article, 2014

W. Y. Li, M. Yu, F. F. Wang, S. Yin, and H. L. Liao, A Generalized Critical Velocity Window Based on Material Property for Cold Spraying by Eulerian Method, Journal of Thermal Spray Technology, 23, 2014, p557 - 566 Journal Article, 2014

Shuo Yin, Pengjiang He, Hanlin Liao, and Xiaofang Wang, Deposition Features of Ti Coating Using Irregular Powders in Cold Spray, Journal of Thermal Spray Technology, 23, 2014, p984 - 990 Journal Article, 2014

Shuo Yin, Qi Liu, Hanlin Liao, Xiaofang Wang, Effect of injection pressure on particle acceleration, dispersion and deposition in cold spray, Computational Materials Science journal, 90, 2014, p7 - 15 Journal Article, 2014

Shuo Yin, Xinkun Suo, Hanlin Liao, Zhiwei Guo, Xiaofang Wang, Significant influence of carrier gas temperature during the cold spray process, Surface Engineering, 30, 2014, p443 - 450 Journal Article, 2014

Wenya LI, Dandan Zhang, Chunjie Huang, Shuo Yin, Min, Yu, Feifan Wang, Hanlin, Liao, Modelling of impact behaviour of cold spray particles: review, Surface Engineering, 30, 2014, p299 - 308 Journal Article, 2014

Shuo Yin, Xiaofang Wang, Xinkun Suo, Hanlin Liao, Zhiwei Guo, Wenya Li, Christian Coddet, Deposition behavior of thermally softened copper particles in cold spraying, Acta Materialia, 61, 2013, p5105 - 5118 Journal Article, 2013

Shuo Yin, Meng Zhang, Zhiwei Guo, Hanlin Liao, Xiaofang Wang, Numerical investigations on the effect of total pressure and nozzle divergent length on the flow character and particle impact velocity in cold spraying, Surfance & Coatings Technology, 232, 2013, p290 - 297 Journal Article, 2013

Shuo Yin, Yan Sun, Xiaofang Wang, Zhiwei Guo, Hanlin Liao, Effect of Spray Angle on Temperature Distribution within the Metallic Substrate in Cold Spraying, Journal of Thermal Spray Technology, 22, 2013, p983 - 991 Journal Article, 2013

Shuo Yin, Xinkun Suo, Jiaqing Su, Zhiwei Guo, Hanlin Liao, Xiaofang Wang, Effects of Substrate Hardness and Spray Angle on the Deposition Behavior of Cold-Sprayed Ti Particles, Journal of Thermal Spray Technology, 23, 2013, p76 - 83 Journal Article, 2013

Shuo Yin, Xiaofang Wang, Wenya Li, Hanlin Liao, Hongen Jie, Deformation behavior of the oxide film on the surface of cold sprayed powder particle, Applied Surface Science, 259, 2012, p294 - 300 Journal Article, 2012

Shuo Yin, Xiaofang Wang, Wenya Li, Yue Li, Numerical Study on the Effect of Substrate Size on the Supersonic Jet Flow and Temperature Distribution Within the Substrate in Cold Spraying, Journal of Thermal Spray Technology, 21, 2012, p628 - 635 Journal Article, 2012

Wenya Li, Shuo Yin, Xueping Guo, Hanlin Liao, Xiaofang Wang, Christian Coddet, An Investigation on Temperature Distribution Within the Substrate and Nozzle Wall in Cold Spraying by Numerical and Experimental Methods, Journal of Thermal Spray Technology, 21, 2012, p41 - 48 Journal Article, 2012

Shuo Yin, Xiaofang Wang, Wenya Li, Xueping Guo, Examination on Substrate Preheating Process in Cold Gas Dynamic Spraying, Journal of Thermal Spray Technology, 20, 2011, p852 - 859 Journal Article, 2011

Shuo Yin, Xiaofang Wang, Wenya Li, Hongen Jie, Effect of substrate hardness on the deformation behavior of subsequently incident particles in cold spraying, Applied Surface Science, 257, 2011, p7560 - 7565 Journal Article, 2011

Shuo Yin, Xiaofang Wang, Wenya Li, Computational analysis of the effect of nozzle cross-section shape on gas flow and particle acceleration in cold spraying, Surfance & Coatings Technology, 205, 2011, p2970 - 2977 Journal Article, 2011

Shuo Yin, Xiaofang Wang, Wenya Li, Baopeng Xu, Numerical Study on the Effect of Substrate Angle on Particle Impact Velocity and Normal Velocity Component in Cold Gas Dynamic Spraying Based on CFD, Journal of Thermal Spray Technology, 19, 2010, p1155 - 1162 Journal Article, 2010

Wenya Li, Shuo Yin, Xiaofang Wang, Numerical investigations of the effect of oblique impact on particle deformation in cold spraying by the SPH method, Applied Surface Science, 256, 2010, p3725 - 3734 Journal Article, 2010

Shuo Yin, Xiaofang Wang, Baopeng Xu, Wenya Li, Examination on the Calculation Method for Modeling the Multi-Particle Impact Process in Cold Spraying, Journal of Thermal Spray Technology, 19, 2010, p1032 - 1041 Journal Article, 2010

Shuo Yin, Xiaofang Wang, Wenya Li, Baopeng Xu, Numerical Investigation on Effects of Interactions Between Particles on Coating Formation in Cold Spraying, Journal of Thermal Spray Technology, 18, 2009, p686 - 693 Journal Article, 2009

Research Expertise

Projects

  • Title
    • A paradigm shift for the future's thermal management devices through radical innovation in new materials and additive manufacturing
  • Funding Agency
    • European Innovation Council - Pathfinder
  • Date From
    • 01.10.2022
  • Date To
    • 30.09.2026
  • Title
    • Novel digital holographic and modelling technologies for unlocking the metal-ceramic co-deposition mechanism during supersonic cold spray
  • Funding Agency
    • Science Foundation Ireland - Frontiers for the Future
  • Date From
    • 01.11.2021
  • Date To
    • 30.10.2025
  • Title
    • Novel 3D printing of bioinstructive ceramics through digital light processing for next-generation bone implantation
  • Funding Agency
    • Trinty College Dublin - Research Boost Programme
  • Date From
    • 01.11.2021
  • Date To
    • 31.10.2022
  • Title
    • Selective Laser Melting of Ti6Al4V alloy for tailored scaffolds into bone defects
  • Funding Agency
    • Irish Research Council - Enterprise Partnership
  • Date From
    • 01.04.2020
  • Date To
    • 31.03.2022
  • Title
    • Development of an automated cutting and folding system
  • Funding Agency
    • InterTradeIreland - FUSION
  • Date From
    • 01.08.2020
  • Date To
    • 31.01.2022
  • Title
    • Numerical investigations into the fragmentation behaviour of microscale ceramic particles upon supersonic impact
  • Funding Agency
    • Trinty College Dublin
  • Date From
    • 01.09.2020
  • Date To
    • 31.08.2023
  • Title
    • Development of a CFD model for predicting the defect generation during Selective Laser Melting
  • Funding Agency
    • Trinty College Dublin & China Scholarship Council
  • Date From
    • 01.10.2020
  • Date To
    • 30.09.2024
  • Title
    • Investigation on powder flow behavior during powder spreading process in SLM via in-situ observation and numerical simulation
  • Funding Agency
    • Trinty College Dublin & China Scholarship Council
  • Date From
    • 01.10.2020
  • Date To
    • 30.09.2024
  • Title
    • Microstructure evolution of cold sprayed metallic glasses and high entropy alloys
  • Funding Agency
    • Trinty College Dublin & China Scholarship Council
  • Date From
    • 01.09.2019
  • Date To
    • 31.08.2023
  • Title
    • Novel Hybrid Additive Manufacturing for the Fabrication of Functionally Graded Multi-Materials Components
  • Funding Agency
    • Irish Research Concil - GOIPD
  • Date From
    • 01.10.2017
  • Date To
    • 31.12.2018